Too Many Trucks Being Parted Out?

DanenGraham

Big in the rear
Re: Too Many Trucks Being Parted Out?

I dont think its a bad thing at all. Think about it, there were so few made that we almost have to use parts from other peoples trucks to keep them like original looking sy/tys. So the more trucks that get parted are just helping fix and restore the trucks that are still around. Fewer on the road, while making the ones out there on jackstands one more peice of the way to road worthy.

Part as many out as you want. I got one that i need to be able to sell for like 30K+...haha
 

T-Bone

Active member
Re: Too Many Trucks Being Parted Out?

Just because I offered to help you doesn't mean that I condoned what you were doing,it just means that I'm a nice guy.

I agree that you are a fairly amiable feller :tup: but consider this. Let's say I did move it outside on the property and cover it up (like I did on my 68 shortbox C10). Guess what.....the C10 door panels and seat molded, the mice ate the headliner and nested in the heater box, the brake rotors rusted to the pads, etc. That occurred in under a year. In the end, I sold it to a guy in GA that was gonna put a modded 454 in it b/c I didn't want to watch it ruin (and hear Tammy complain about it being an eyesore every time we drove down the driveway).

The Ty would have developed the same issues and it was way too nice to see that happen and I know for a fact, that almost mint parts pull more money that parts with mice urine, poop, and teeth marks embedded in them. Not asking anyone to condone what I do, but it made the most sense then.....and now!

Did you ever get the new plugs in? Let me know if you still need to replace them. I'm available to give you a hand.
 

George Blake

DONATING MEMBER
Re: Too Many Trucks Being Parted Out?

Yes. Too many are being parted out. My truck needs some work but didn't understand the extent of how far a person will go to get a good deal to maximize the return on a part out. Guys, quit doing it. If you guys will stick to your senses and NOT sell your truck for a nickel, they won't buy it. When the "gentleman" came out to look at my truck, I got the "my buddy says we can do an 80e for $4500." The trans in MY(or Mr. Brown I should say) truck right now is worth by itself, not including the converter and controllers is almost $6K. Now add in controller, converter, kit to put it in, new front prop, rear driveshaft, all new accessories on the engine, JSM downpipe, coil over front suspension, CBR C5 front brakes, my own carbon fiber gauge faces.......the attempt was there and the intentions were clear. He could care less about the truck, or all the boxes of everything going with it. The true intent was to get it for $4500 and strip it out and make a profit. Guys, quit giving your shit away and they WILL quit parting it out because it won't be worth it.
 

turbodig

Active member
Re: Too Many Trucks Being Parted Out?

. Guys, quit giving your shit away and they WILL quit parting it out because it won't be worth it.

I think that's a lot easier said than done.

When guys are making decisions to take a beating on a syty or stay solvent, the above gets hard to do.
 

Big Mike

New member
Re: Too Many Trucks Being Parted Out?

Dave, 1 of them was mine and although I feel the pain and concern of some forum members, it also has to be taken into consideration that my particular mint Ty was offered as a roller. No-one took it and the garage spot was going to the Z06. I could either move it outside and let it begin to rust away OR part it out and let other forum members in need benefit from it. Bottom Line is that either way, it was not gonna be worth much of anything in the long run since nobody wanted it as a roller. The more that disappear, the more the survivors will be worth. It is just a matter of time unless we enter into a depression in which case very little will be worth much of anything.


Why does a Z06 need a garage spot isn't the car made out of plastic and aluminum? You do know plastic and aluminum does not rust right????
 

hrodgmc

New member
Re: Too Many Trucks Being Parted Out?

Too bad the zo6 is not the Badboy on the street anymore.

Carbon fenders were made in NC or Tenn.
 

tnsyty

Active member
Re: Too Many Trucks Being Parted Out?

I could probably get more money in parts for mine. Truck runs pretty good, but the paint is faded, and it has a dent in the fender. All cladding is there. It would sell for what 5000?

If I part it out, I have a GM syty crate engine with 8k miles, a TD06 20G with 4k miles, waller tranny with about 2k, stock wheels, all the leather is perfect, as is the rest of the interior. Cladding, syty specific parts, ultimate 3bar, ect. I really think it would bring more money. It has been paid for for years, so I just let it sit in the carport averaging about 400 miles a year the past couple of years.
 

T-Bone

Active member
Re: Too Many Trucks Being Parted Out?

Too bad the zo6 is not the Badboy on the street anymore.

Carbon fenders were made in NC or Tenn.

You know what they say.....there will always be something faster. # 1 = Viper ACR, #2 = ZR1, # 3 is the C6 Z06 but the odds of pulling up beside either #1 or #2 on the street are about as good as a gnat hitting your antenna when you are driving down the road :tup:. I've driven a lot of performance cars and I have to admit, I am very, very impressed with the Z06 in every performance category.
 

T-Bone

Active member
Re: Too Many Trucks Being Parted Out?

I could probably get more money in parts for mine.

BINGO!! Of course, you could always advertise it and put a higher price on it and it might sell complete, as long as it is accurately described, doesn't run like pooh and the mods are quality mods and not basement or backyard creations :). Sounds like you have some decent stuff on it though.
 

Syclone#892

Member
Re: Too Many Trucks Being Parted Out?

I was going to make a post like this but decided I did not want to create a rucus.

I agree that it seems like far to many good trucks are getting parted out. I understand one thats smashed etc but one that needs an engine or something getting parted because there is more money to be had that way.
I know my truck wont be worth a ton years later because of how much is modified etc, it will never be stock again. History seems to repeat itself and these people that are looking for a quick buck now might be screwing themselves over when ten yrs from now it may be worth twice as much.
No one knows for sure but I know my dad hates the amount of cars and car parts that he threw away or sold cheap that would be worth a ton of money now:tdown:

How many people on this board think of it as a business? I certainly dont and I personally hate that as a reason for tearing a truck apart. This a hobby for people who love these trucks and try to keep them going not people that just want to make a buck.

Glad to see there are other people on this board that think the same as me:tup:
 

NecroWolf

lost marbles member
Re: Too Many Trucks Being Parted Out?

i understand the part out thing, hell i've bought parts from fail projects and sold them when i changed my mind but its paid for and if i get tired of fixing it i'll just store it till i get the need and then drag it bag out.
 

Ross L

Member
Re: Too Many Trucks Being Parted Out?

over on the SVO boards you can't even post about parting out a car(to sell the parts). You will be deleted and banned.The thought is,fewer cars = fewer incenitives(sp) for aftermarket companies to make parts..... Or increased prices for the aftermarket parts. I believe the moderators may allow it,although I've never seen it, if the condition is verified and it is deemed unrepairable. Don't quote me on any of this:2cents:
Ross
 

T-Bone

Active member
Re: Too Many Trucks Being Parted Out?

over on the SVO boards you can't even post about parting out a car(to sell the parts). You will be deleted and banned.The thought is,fewer cars = fewer incenitives(sp) for aftermarket companies to make parts..... Or increased prices for the aftermarket parts.

This is a commendable idea but the fact is, the parts sold on here COULD (and often do) pull more money on ebay. Regulating this site like that will force sellers to ebay and IF you need a part, you will in turn be forced to wait 7 more days and bid it out with hundreds of other interested parties (case in point; a $250 ultimate set-up listed on ebay by someone around here recently pulled close to $700 on ebay). I have literally given parts away to help others out on here. I sold a complete MINT Typhoon door with all the internals AND the external cladding for $300. Some of us aren't on here to simply make a buck and I could have found alot better and more prosperous ways to spend my time over the last 4 months regarding the 93 Ty I parted but, in truth, these vehicles will get parted from time to time around here and this forum is a great venue to benefit all involved; seller and buyer.

A saavy business person better consider that the more these trucks are parted out, the smaller the prospective buyer market will become over time but like othrs have said, it is the owners property to do with as he/she pleases. If they design it to mud bog, what business is it of ours?
 
Top