Re: Chip in Chicaoland
I have no clue what chip was installed. The sticker over the eprom was removed and the chip had an ID of 1003 on the scan tool. What ever it was, it was junk.
The stock map sensor and chip FTW!!!!
I had to turn the fuel pressure down to get long term fuel correction...
Re: Chip in Chicaoland
I had the local GM dealer overnight a stock memcal and 2 bar map sensor.
I installed the map sensor and turned the ignition on. The factory boost gauge sat in the correct position (not at the first devision in vac like the 3 bar) I started the motor up with my scan...
Re: Chip in Chicaoland
I have been thinking about this. My customer bought the truck with a blown motor and put a new motor in it and has had these running issues from fire up. The motor has about 25 miles on it now.
Anyway, I am thinking its possible this truck has a 3 bar map sensor and a...
Re: Chip in Chicaoland
I talked to BG and he said all his chip stuff is in storage. I emailed sytychips.com (todd I believe) and have gotten no response.
I would settle for an ATR Pitbull chip, stock.. just about anything for stock size injectors.
I guess its time to call the local GM...
Re: Chip in Chicaoland
I didnt install the injectors, I am working around them though. IIRC, stock injectors were around 28 lb so these should be in the ballpark.
My scan tool shows the truck never goes closed loop. Block learn never moves from 128 despite idling at over 900mv. No CELs.
I...
I have a customers truck here with chip issues. Current chip is a disaster. Open loop with unknown operating parameters. The truck has a 3 bar map sensor and Accel 30# injectors in it. High 900mv at idle and low 200mv at cruise and WOT.
Will be happy to get a 2 bar map and a stock chip if...