Recent content by Bruce

I apologize if this is a silly question - I searched the forums and couldn't find the answer. When filling or refilling the IC radiator, the shop manual suggests disconnecting the IC Pump, turning the ingition to on and crossing the wires to turn the pump on so that the antifreeze will...

You were right - I am missing the trim panel - any idea what the part number is and if it's not discontinued? Removing the ECM and pulling the dash out did give me enough room to maneuver. At this point the new heater core is in and I have the cover in - have to start putting the screws back...

I may not have that piece. In this picture, is the piece already out? Mine looks like in this picture... http://www.sytyarchives.com/howto/climate_controls/heater_core_images/heatercore05.jpg How many bolts have to be removed under dash to let it rotate and drop down? I have one out so far...

So this is the piece that has three of it's scews directly under the bottom of the glove box door? Does the piece actually come off? Or does it just allow the whole dashboard to swing out a bit? Thanks, Bruce

Adam, yes that's the article that I'm following. It's excellent. I just am missing what the footwell trim panel is - under interior removal - step 2. I think if I could figure that out, it might give me more room to maneuver.

Saturday morning, I noticed the lovely green liquid leaking onto the floormat. I started searching through the archives and found Ian's very complete guide to removing the heater core. I've got all of the screws holding the cover to the heater box out and there's not enough room to remove the...