Search results

  1. D

    injectors

    where can i get a set of injectors tested and flow matched??
  2. D

    silicone vac hose

    you guys using silicone vac tubing, do your hoses flatten out under vac?(idle)_
  3. D

    trouble building vacuum

    Re: trouble building vacuum I'm chasing the same problem as you, I just did the vac test with a bike tube and found my new iac is slowly pissing air. The hiss was hard to hear but it got worse when I wiggled the electrical connector. Seems to be leaking where they joined the plastic to the...
  4. D

    pcv valves

    Re: pcv valves gm says they are dicontinued, anyone know where i can get them
  5. D

    pcv valves

    are both pcv valves the same part number???
  6. D

    Need help for next article: diagnostic software

    Re: Need help for next article: diagnostic software you say at idle the iac counts should be between 10 and 30. is this with or without any accesories on(such as a/c or in gear)? mine with nothing on is at 0-2, then with a load it jumps up b/w 10-30..
  7. D

    stock chip

    Re: stock chip will this work in a 92? the other link you gave me said 93, just making sure... thanks
  8. D

    stock chip

    is the stock chip still available through gm?
  9. D

    upper ic

    has anyone had the upper ic shoot water from the cap. i put a new cap on and still have the problem. i checked for kinks in the hoses thinking its building up pressure then releasing, but they are ok. i think its johnson pump.
  10. D

    vaccum

    Re: vaccum thanks for the input, i have a 412 cam and the vac seems to be around 15 the when i apply a load, such as ac, my vac is around 10. and then the idle starts to search around. i've replaced all vac lines and can not seem to get the vac any higher. where is the switch for park/neutral?
  11. D

    vaccum

    can someone tell me what the vac psi is at idle with no accesories on and with the vehicle in gear?? also is there a way to adjust the idle up when in gear or is the ecm controlling it. i can raise the idle of park but when i put it in gear it drops way down.
  12. D

    tuning

    Re: tuning i tried to isolate the accesories that ran off vac to determine if i had a leak,and when i removed the brake booster hose the rpms did rise but the idle smoothed right out. my motor is a fresh rebuild so i know i don't have leaks there. so i figured the next thing to do was...
  13. D

    tuning

    why would my truck idle better with a vac hose off, shouldn't it be the other way around???
  14. D

    o2

    Re: o2 thanks for the info, thats around the temp i had on my scanner. i thought it was too low. my truck idles fine till it switches from open to closed then it stumbles looking for idle till the truck warms up. i've replaced every sensor i have found on the search, adjusted fuel press, adj...
  15. D

    o2

    does anyone know around what engine temp that the o2 should change from open to closed loop?
  16. D

    chip?

    Re: chip? the sticker doesn't say. from what i see on the forum this chip isn't that good right.
  17. D

    map sensor????

    Re: map sensor???? 2 bar
  18. D

    chip?

    When I bought my ty, the previous owner had a chip in it. I pulled the chip out and the sticker on it is from Applied Techologies in Fair Play S.C. Has anyone used this place before and maybe know what chip this could be?
  19. D

    map sensor????

    I'm in the process of chasing a surging idle. I unpluged the map sensor and the engine runs perfect. It's a newer map sensor, and had same problem with the old one. I'm getting 5 volts to it. Has anyone come across this and found a solution?? I hooked up a scanner and the scanner shows under 1...
  20. D

    what chip?

    Re: what chip? i'm in the middle of a rebuild and need a chip also, how can i get in touch with one of these guys??
Top