3 bar MAP Sensor

akwilks

Mr. Keith
I went to the RPM site this evening and looked at their 3 bar sensor selling at 60 dollars. The picture of the sensor had an orange insert....Is this a true 3 bar sensor? I have one of these on my Ty and I dont know if its a 2 bar or 3 bar sensor...Is there a way to test it to find out?

Arn
93 Typhoon...was told there were mods on the truck and trying to verify if its true
 

SpoolingTurbo6

Donating Member
Re: 3 bar MAP Sensor

The insert is not what tells you ... its the notches in there that make it a 3 bar(and the calibration of it of corse).... But alot of 2 bars had orange plastic inserts 3 bars have black molded plastic in them that don't come out....
Tyson
 

ghettosled

SYTY SUPERSTORE
Re: 3 bar MAP Sensor

The two bars typically have the orange insert, and the 3 bar doesnt have any... Rest assured if you order a 3 bar, thats what you will be getting... the pn is the only real way to tell, other then testing it with a ohm meter. sorry if the pic confused you.
 

SY2932

Administrator
Re: 3 bar MAP Sensor

IMG_0250.sized.jpg

"MAP sensors, stock 2 bar on left (orange/red connector) #16009886 and 3 bar on right (black connector) old number is #16040749 new # is #12223861."
 
Top