3 bar

NecroWolf

lost marbles member
how do you tell the difference in a 2bar and 3 bar. i seen where someone mentioned a multimeter but didn't elaborate. i had a friend give me a 3bar map sensor or so he said and when i put on my truck with my new 3bar chip and 50lb inj, the truck runs like utter ass. misses and backfires at any attempt at boost, smells really rich and won't idle. i put my 2bar back on and it actually drove a little better. not much though.
 

dgoodhue

BuSTeD 4.3
Re: 3 bar

If you look at your boost gauage with the engine off, but ignition on. With a 2 bar MAP its at 0, with a 3 bar it should be around 1/3 into vacuum. Their should be a noticable difference between the two if they are not exactly at those points.
 

NecroWolf

lost marbles member
Re: 3 bar

well i put my known 2 bar back in and it's in the same identical spot. so i guess got a pair of 2 bar map sensors. well anyone wanna trade a 3bar for 2 bar?
 

outlaw1987

Member
Re: 3 bar

dgoodhue said:
If you look at your boost gauage with the engine off, but ignition on. With a 2 bar MAP its at 0, with a 3 bar it should be around 1/3 into vacuum. Their should be a noticable difference between the two if they are not exactly at those points.
Are you talking about around 1/3 on the stock boost gauge or an aftermarket one because it always seems that the stocker is around 1/3 into vacuum even when the truck is off?
 
Top