90 degree turbo coolant fitting

ron

New member
well, when pulling off the turbo coolant line that comes out of the front of the block i broke the 90degree fitting. It was inevitable(sp?) though the way the darn thing was rusted out. Autozone doesnt carry anything like it and by the time I got it off it was too late and everywheres else was closed(sundays blow). I broke the part that connects to the rubber hose, so once that snapped off it came out much easier. Could they have made that thing any harder to get a wrench on? my question is, does anyone know where I can get a fitting like that at? O'reilly's, Napa, local hardware store or am I stuck getting ripped from the dealer? TIA.

ps. thanks to John Waller for the new hardline, it looks much better than my old bent one, much cleaner too!
 

SY756

New member
I am not for sure if you could find one those at the local parts store. If you are really in a bind you could probably go to the hardware store and "fit" one together with a 90 degree brass fitting and a barbed adapter. And that would be alot easier to get in & out and it since you could take the adapter off and get the 90 out without too much trouble. I think I still have the part you are needing laying around somewhere since I went with the PTE, if you want it let me know. BTW, no charge on it. Not trying to make a buck.
 

Sy#26

New member
Take the remains to NAPA or AutoValue or somesuch (forget AutoZone) - you're looking for a "banjo fitting" used on some brake systems. Shouldn't be hard to find. Tried Dal?

Barry
 

ron

New member
Thanks, I'll try napa tomorrow if I get a chance.
I knew autozone was a bad choice but they are the only place open after 6pm on a sunday. Kinda depressing when you're planning on starting her up and something like this stops you.
 
Top