A/C delete

[Andreas]

Gone throw out the A/C
Searched the forum and found the AC delete pulley number GM #10118713

That pulley and a new belt, is that all parts it takes for a A/C delete.

 

[ed hess]

i used the same belt... but yeah thats all..

ed

 

[Andreas]

Thanks Ed.

 

[InvisiBill]

FYI, the non-AC trucks don't have the little pulley underneath the AC compressor, and I do believe it's supposed to be a slightly shorter belt.

 

[turbosonoma]

if you want to do it right and clean it up under the hood you should put the non ac heater box in which is alot smaller and then you could get the non ac heater controls. If you need these send me a PM I can help you as i have one kicking around.

 

[ghettosled]

the idler pulley from GM doesnt require a new belt. You may also want to consider our delete kit which removes the entire bracket assembly and stock tensioner in favor of a small and more compact setup.. Kit comes with powdercoated bracket, tensioner, hardware, instructions and new belt.. everything needed for a complete install.

here is a pic

 

[typhoon92]

(turbosonoma)
Have you mailed mine out?

 

[Andreas]

Yes Mike I've seen your great delete kit, but gone go with the "budget" GM kit and use the rest of the money for the ITS minigate that you sell.

 

[turbosonoma]

(turbosonoma)
Have you mailed mine out?

Yes it went out last friday.


Thats a very interesting delete pulley thing Mike, how much are they worth? I wanted to get rid of all the stock bracketry stuff and mount the alt in closer and get rid of the ps pump so i ordered the march kit, but they are definatly not for anyone on a budget, to bad i didnt see that before....

 

[TYTILIDIE]

I wish someone would come up with an entire different bracket/pulley system for our trucks that doesnt cost an arm and a leg. Since I am also into Corvettes I had ordered me a Street & Strip Performance catalog and they some pretty nice kits in there taht would work for us. However Im not sure but it kinda looks like you would have to fart around with the radiator hose to get it to work. But whats really cool is their mini PS pumps and remote resevoirs. Ive thought about ordering one of these kits but would hate to spend the $ not knowing if it will all fit.

Mike

 

[ghettosled]

the delete kit is $199 which includes the new powderocated bracket, GM ten$ioner, new serpentine belt, hardware and instructions. I have seen the March kit (i think thats the one some guys are using) and it is the reason i designed my own kit.

 

[TYTILIDIE]

Hope you dont mind me asking this on your post but, I did the A/C box delete but stillhave the compressor there as I havent had time to figure out what to do with it. I did notice that ever since I went to the non A/C box, Its colder than shit in my truck . I just did my heater core last week and didnt notice a difference. When I put my hand over the vent I can feel the hot air but it just doenst blow out worth a shit. The fan works fine and the flap is open to where its supposed to be. I used a motor for an 81 Vette cause I didnt want to pay $80 for the non A/C fan at the dealership. The blower wheel is jsut generic. Any thoughts?

Mike

 

[Andreas]

Got my AC delete pulley number GM #10118713 today.
But there was no bracket/plate to bolt it on.
Did you guys that ordered this "kit" get the bolts and plate that goes where the A/C comp was before. Or did you fabricate your own?

 

[bigtime]

10115875 is the number for the 1LE camaro AC delete pulley from gm. Here is a pick of what you should have.

 

[Andreas]

Crap! so it was wrong part number then.... 15 at the end not 13 that I ordered ...


Thanks for the correct partnr Bigtime

 

[Andreas]

messed up now hahaha
I got the number now 10115875 :lol:

 

[Andreas]

Re: A/C delete

Ok ...the shop wants 214USD for the AC delete !!!

Can't order from GMpartsdrect since my cred.card isn's issued in the USA.

Just checking if someone have the possibility to buy and ship it to me overseas.
I know its a long shot but hey, got to try.

10115875 is the number for the 1LE camaro AC delete pulley from gm. Here is a pick of what you should have.

 

[SY2932]

Re: A/C delete

Ok ...the shop wants 214USD for the AC delete !!!

Can't order from GMpartsdrect since my cred.card isn's issued in the USA.

Just checking if someone have the possibility to buy and ship it to me overseas.
I know its a long shot but hey, got to try.

I have helped out a member on your side of the "pond" a few times, shoot me an email at syclone2932@alltel.net and we can discuss the details...

 

[VermontTy]

Re: A/C delete

You may also want to consider our delete kit which removes the entire bracket assembly and stock tensioner in favor of a small and more compact setup.. Kit comes with powdercoated bracket, tensioner, hardware, instructions and new belt.. everything needed for a complete install.

I'll be going this route when the time comes; with how crammed in things are under the hood, getting rid of that big honkin bracket that holds the A/C compressor is worth the extra money IMO.

 

[Andreas]

Re: A/C delete

This is a nightmare....

Part.nr 10118713 is just the pulley...that was my first buy...

Part.nr 10115875 is not what shown in the picture here in this thread. I got the part now in my hand and it has 10115875 stamped in it so I'm not wrong. The pulley is smaller and the braket is not as deep.

This shit is going out thru the window.I just make some braket on my own for the pulley....120$ down the drain....

Just for others that want to do the AC delete...go with the RPM kit!