About top speed gov.

SeattleSy#1255

Category 5 Conservative
Question,

i have the ultimate installed etc etc. and one day i took the sy out to see the top speed i could reach using datamaster. I would get to 126mph and it would never move from there. Doesn't the ultimate v7 erase the top speed gov. and if so, why can't i get past 126mph?

just curious, this happened quite awile ago and was just thinking about it.
 

dgoodhue

BuSTeD 4.3
Re: About top speed gov.

SeattleSy#1255 said:
Question,

i have the ultimate installed etc etc. and one day i took the sy out to see the top speed i could reach using datamaster. I would get to 126mph and it would never move from there. Doesn't the ultimate v7 erase the top speed gov. and if so, why can't i get past 126mph?

just curious, this happened quite awile ago and was just thinking about it.

The top speed govenor in the ECM is actually boost cut. The ECM has a parameter to disable the boost at certain mph. In daat master you would see the boost level drop at 126mph if your was set at 126. I looked at my Ultimate bin and I think it was set at 199.

BTW I think syty, especially Ty with 116mph boost cut, would be able to go faster than the boost cut mph. The boost would revert to the base boost of the wastegate actuator (stock is approx 9psi), so I think that a Ty would have enough hp to still accelerate past 116mph with 9psi.
 

SeattleSy#1255

Category 5 Conservative
Re: About top speed gov.

dgoodhue said:
SeattleSy#1255 said:
Question,

i have the ultimate installed etc etc. and one day i took the sy out to see the top speed i could reach using datamaster. I would get to 126mph and it would never move from there. Doesn't the ultimate v7 erase the top speed gov. and if so, why can't i get past 126mph?

just curious, this happened quite awile ago and was just thinking about it.

The top speed govenor in the ECM is actually boost cut. The ECM has a parameter to disable the boost at certain mph. In daat master you would see the boost level drop at 126mph if your was set at 126. I looked at my Ultimate bin and I think it was set at 199.

BTW I think syty, especially Ty with 116mph boost cut, would be able to go faster than the boost cut mph. The boost would revert to the base boost of the wastegate actuator (stock is approx 9psi), so I think that a Ty would have enough hp to still accelerate past 116mph with 9psi.

So if the ultimate bin is set to something like 199, why is it that i can't get past 126? Excuse my stupidity, i do not know much about ECM crap. :lol:
 

doomdead

New member
I've buried the needle far past 125 without the ult. dont ask me how, i was going downslope at the time, smoking the shit out of a guy next to me. and when i looked down my needle was far enough past 125 that i said oh shit. robyn looked over, and i got off the gas... took a few good seconds to fall down under 125...



btw, there are some odd noises moving a brick through the air that fast.
 

dgoodhue

BuSTeD 4.3
Re: About top speed gov.

SeattleSy#1255 said:
dgoodhue said:
SeattleSy#1255 said:
Question,

i have the ultimate installed etc etc. and one day i took the sy out to see the top speed i could reach using datamaster. I would get to 126mph and it would never move from there. Doesn't the ultimate v7 erase the top speed gov. and if so, why can't i get past 126mph?

just curious, this happened quite awile ago and was just thinking about it.

The top speed govenor in the ECM is actually boost cut. The ECM has a parameter to disable the boost at certain mph. In daat master you would see the boost level drop at 126mph if your was set at 126. I looked at my Ultimate bin and I think it was set at 199.

BTW I think syty, especially Ty with 116mph boost cut, would be able to go faster than the boost cut mph. The boost would revert to the base boost of the wastegate actuator (stock is approx 9psi), so I think that a Ty would have enough hp to still accelerate past 116mph with 9psi.

So if the ultimate bin is set to something like 199, why is it that i can't get past 126? Excuse my stupidity, i do not know much about ECM crap. :lol:

I bouble checked, mine is actually set for 194. Maybe not all ultimate were programmed with boost cutoff. Maybe you have other issues...
 
Top