mmvic
New member
These plugs only have a couple hundred miles on them, they are very black and are covered in oil. These are the plugs on the drives side, the passanger sides plugs arnt as black w/ very little oil. I knew I was running way too rich and now Im suspecting I have major problems :banghead:
And I was doing something wrong when I check the compression b/c all three cylinders on the drivers side were between 65-90 psi. Did a little reading after the fact and found some helpful tips. Do i really have to disable the ignition module or coil? and if so how? I also didnt let it warm up or hold the throttle.
I am really just learning everything as I go and already feel in over my head. I appreciate any help or opinions. I wish I knew half as much about engines as I do about drywall
And I was doing something wrong when I check the compression b/c all three cylinders on the drivers side were between 65-90 psi. Did a little reading after the fact and found some helpful tips. Do i really have to disable the ignition module or coil? and if so how? I also didnt let it warm up or hold the throttle.
I am really just learning everything as I go and already feel in over my head. I appreciate any help or opinions. I wish I knew half as much about engines as I do about drywall
Last edited: