AFPR troubles?????

MYYellowTY

New member
Ok so I have a problem with FP dropping down over time.I have changed to Walbro and a KB AFPR on it.Ive pinched the rubber line on the fuel feed line and no change.Clamped the return line and no change.So either FPR or injectors right???I tore the reg open and couldnt see and problems.Ive got 40# injectors coming to put in thinking #4 cyl injectors not seating closed.That cyl is at 155 psi and all others are 175-185, so im thinking its fuel soaking that cylinder.But now ive been reading and found the diaphragm in these regulators go often.So I put a vac pump on the rubber hose to the reg and go to 10psi and it drops instantly.It should hold vacuum right????Plus the hose smelled of fuel after.Diaphragm????And WHERE can I get just a diaph. at? It looks like they are all the same RPM,KB,Accufab and even the stock vette diaph is the same but $70.Anyplace have them at less then half the price of new Regulator or so???And might this be some of my KR #s being so high since the vacuum and boost would leak and it would lean way out under boost???Sorry so many ??'s !!!Thanks!!!!
 

sy2675

He Saved the Pimp'n Game!
Re: AFPR troubles?????

mine went out, pressurize the fuel system while the hose to the afpr is not hooked up, if it is torn or has a hole, fuel will come out
 

sy2675

He Saved the Pimp'n Game!
Re: AFPR troubles?????

i have a contact # to get replacement diaphrams, just got to find it, i think it is stored in my aol account, PM me if anyone is interested.
 

MYYellowTY

New member
Re: AFPR troubles?????

Waiting to get Sy2645s contact info when he finds it, but anyone else know where to get the diaphragm???Thanks!!! Would a vac leak in the FPR cause KR because boost pressure is not adjusting the FR higher???TIA ALL!!!
 
Top