AFR's with 2step?

Sean Krupa

Moderator
Just installed my MSD 6AL-2. I have mine set to 3k rpms, haven't launched it yet, waiting for my switch to come in.

Just curious, what AFR should I be in with the 2step engaged while building boost? I'd think maybe on the Rich side to help spin the turbo?

Thanks,
 

Sean Krupa

Moderator
Re: AFR's with 2step?

That makes sense since the WB detects oxygen before they detect richness. Since a 2 step is dropping spark, it will still pass oxygen to the O2 sensor, hence lean.

Good to know,
 

Quickstop [UK]

Combating adversyty.
Re: AFR's with 2step?

I thought that a rich tune would be cooler and the turbo won't spool as much. A leaner tune is hotter so the turbo spools faster.

The problem as I understand it is that the 2 step retards timing so you have fuel burning past the exhaust valves = melted valves.

A cooler, richer tune is going to be better than a lean one but for the opposite reasons you suggested Sean.

Others might want to correct me on this.
 

bezerk

New member
Re: AFR's with 2step?

a 2 step cuts out cilinder randomly, and you wont burn the valves.i would think a rich tune would be worse, since you are dumping alot of fuel while staging, and wash the cilinder walls.
 
Top