Aftermarket Boost Gauge Install

tbauer03

TRBOBOX
I have seen these T connections that go on to the right side of the intake manifold and it allows you to connect a boost gauge to them getting the best measurement of boost. I am sure someone will know what i am talking about and i have seen them for sale before but can't find it at the moment so if someone could help me out that would be nice. I tried search but it gave me a ton of results.
Thanks
 

InvisiBill

Active member

Loeryder

New member
You need all three fittings from APE.

At that end you will have nothing but nylon tubing.
The compression fitting attaches the nylon tube to the brass nipple that threads into the larger barbed fitting.

I've got the APE b/c Jesse wasn't around back then.

You could always paint it or have it powdercoated.
 

InvisiBill

Active member
Loeryder said:
You need all three fittings from APE.

At that end you will have nothing but nylon tubing.
The compression fitting attaches the nylon tube to the brass nipple that threads into the larger barbed fitting.

No, you only need two of the three. The $9 one is the short "barrel" piece that has the hole in it, plus the stock-like brake booster hose barb (http://www.autoperformanceengineering.com/pics/fitting.jpg). The $2 one is a small hose barb to go into the hole on the other piece (http://www.autoperformanceengineering.com/pics/hosebarb.jpg). The $3 one is a compression fitting that goes into the hole, if your boost gauge has the small nylon tubing (http://www.autoperformanceengineering.com/pics/compression.jpg). You only need to order one or the other of the cheap ones, depending on which style you need to hook up your boost gauge's line.
 
Top