BLACK92TY
It's never enough
Had a weird day at the track today. Wasn't the best of conditions for a track day but I figured I'd make some passes before I put it away for the winter up here in Minnesnowta. Times weren't dramatically different from previous best but felt week towards the end of the track. Little bit of boost fluttter, zero knock but A/F was around 14.6-14.7. For a modified truck it seems a bit lean but I'm no tuner so I'm looking for troubleshooting solutions. Wondering what you guys think about ideal A/F ratio for the combo I'm running.
Build is .030 over, 4 bolts,Eagle HBeam rods, JE pistons, Hood custom cam, L35s, 60# inj, Walbro FP, AFPR, WB02, sureflo IC pump, external WG, EGR delete, catless dynomax, Dig Tuned 17 in 1 chip so the race setting isn't the one I use when I'm weekend cruising. Usually run a more conservative setting but the boost has always been obedient (particularly after external gate conversion).
Truck ran clockwork 12.81s until now. 12.88 isn't too far off so I might seem like I'm nitpicking, but the sputtering at the end of the track is what has got me puzzled.
Build is .030 over, 4 bolts,Eagle HBeam rods, JE pistons, Hood custom cam, L35s, 60# inj, Walbro FP, AFPR, WB02, sureflo IC pump, external WG, EGR delete, catless dynomax, Dig Tuned 17 in 1 chip so the race setting isn't the one I use when I'm weekend cruising. Usually run a more conservative setting but the boost has always been obedient (particularly after external gate conversion).
Truck ran clockwork 12.81s until now. 12.88 isn't too far off so I might seem like I'm nitpicking, but the sputtering at the end of the track is what has got me puzzled.
Last edited: