Alky nozzle placement

[TYTILIDIE]

I have A2A and the way my set up is it has a 4"x3" 45* elbow at the TB. Then it goes into the 3" polished pipe. My question is, when I mount the alky nozzle it is not going to spray perfectly straight in to the intake, will this be a problem? Here is a pic of how its set up

Is there nay way to go in from the top of the TB?

 

[It's just a six]

Re: Alky nozzle placement

Should not be a problem.
It will get all mixed/blended before it gets to the valves.

 

[TYTILIDIE]

Re: Alky nozzle placement

Awsome, good to know then. I thought I was going to have to come up with some hair brain idea to make it work.

 

[berzerker]

Re: Alky nozzle placement

just install the nozzle right before the rubber elbow inlet into the throttle body. done !

 

[SY2932]

Re: Alky nozzle placement

Should not be a problem.
It will get all mixed/blended before it gets to the valves.

YUP Mark Larson had his alky plumbed *way* upstream on his old syclone with no issues:

 

[TYTILIDIE]

Re: Alky nozzle placement

Interesting oil sending unit location.

 

[vortecfiero]

Re: Alky nozzle placement

Interesting oil sending unit location.

knock sensor perhaps ?

 

[nallj92]

Re: Alky nozzle placement

knock sensor perhaps ?

just a braided line extension for the oil sender, its a aftermarket gauge

 

[berzerker]

Re: Alky nozzle placement

2nd the oil psi sender .