Might work..?? FYI the 4.3 Eagle is on the right.
JSM Active member Aug 13, 2003 #2 I am thinking you may need some spacers to extend the bore on the cylinders for the longer rod. I hear summit has the spacers in stock, or of course you could do it yourself with some 4"x6" lumber and a 4" hole saw.
I am thinking you may need some spacers to extend the bore on the cylinders for the longer rod. I hear summit has the spacers in stock, or of course you could do it yourself with some 4"x6" lumber and a 4" hole saw.
ghettosled SYTY SUPERSTORE Aug 13, 2003 #3 nah just cut the rod in half, shorten it and weld it back together.. should balance out no problem
myclone Donating Member Aug 13, 2003 #4 I'll prolly have to go with Jeff's idea since I dont have a TIG (yet) and since Ive got some pressure treated 2x6s left over from the bathroom remodel job. :wink: :wink:
I'll prolly have to go with Jeff's idea since I dont have a TIG (yet) and since Ive got some pressure treated 2x6s left over from the bathroom remodel job. :wink: :wink:
X Xplicit Racing Design New member Aug 13, 2003 #5 i say keep piling on headgasket's till the piston doesnt hit, 25-30 max