Anyone had experience with the Blitz Boost Controller?

Syclone#1992

SyTy.net Moderator
I need to set-up the boost in Manual mode. I would like to know if anyone knows what the ratio is or close to what it is. IE 20=15PSI, 30=16 PSI. How much does it vary? About how much does it vary? Or is every truck different? Hopefully this setup will complete all problems with boost issues :lol: :lol:

BTW: I have an SS Cat with ATR Cat back with a TIAL 35 MM wastegate. Stock turbo too.

Thanks in Advance,
 

Wes

Donating Member
You'll just have to find out by testing, it's going to be different for different setups. Your boost should be rock solid with the Blitz. Also you'll have to mess around with the gain to get it to build boost quickly (but not so quickly that it causes a spike).
 

myclone

Donating Member
FWIW.. On mine the gain is 35 and a boost setting of ~26 is 16psi for cool weather. Warmer weather the boost setting needs to be raised to ~32. This should give you a place to start but as was mentioned each set up is diff and will require slightly diff settings.

HTH
 
Top