Argh, failed emissions

PPI Typhoon

DIY Madman
Ok, I've searched and read all the things. After a complete tuneup, it's lower, but still failing the HC. I'm going to try the tan wire trick tomorrow, but it throws a check engine light. Is there any quick way of disconnecting the light. I can't just put tape over it or they'll see that. Other option is to take out the bulb, but wondering if there is a quicker way.

Thanks,
 

bezerk

New member
Re: Argh, failed emissions

cut the wire at the ECM, or better yet, make a switch there, so you can pull this trick every year
 

PPI Typhoon

DIY Madman
Re: Argh, failed emissions

Man I feel so dishonest....

It passed with the tan wire disconnected.

HC: (pass is 220)
was 337
now 63

CO: (pass is 1.20)
was 1.17
now 0.07

:rotf:

I'm just gonna burn a chip with no advance so I can just change to that through my moates adapter next year.

It's amazing how much better it passes. :D
 

Loeryder

New member
Re: Argh, failed emissions

How'd you hide the CE light? or did it not come on while you were testing?

Gonna have to try this one next spring. The Ty is already stored for winter.
 

TheNeek

this is my serious face
Re: Argh, failed emissions

I disconnected my tan wire and passed in august. They didn't even look at the CEL. Didn't hurt that the guy doing the testing owned a Chevy Xtreme. I live in po-dunk Tucson though, not as high class as Dan up there in Phoenix :)
 

chelo

filthy sy
Re: Argh, failed emissions

you guys are lucky. I passed a week ago,but the guy checked the wire. Actually both times. Once it failed and once it passed. Smog was done at 2 diffrent locations too.
 

mrweelr

New member
Re: Argh, failed emissions

Damn, never knew about this trick. All that messing around with fuel pressure to get it to pass and all I had to do was disconnect the tan wire!?! Will have to remember that one.
 

PPI Typhoon

DIY Madman
Re: Argh, failed emissions

chelo said:
you guys are lucky. I passed a week ago,but the guy checked the wire. Actually both times. Once it failed and once it passed. Smog was done at 2 diffrent locations too.

Its easy enough to hide that, but I don't see how them looking at that wire is part of the inspection.

I'd shit a brick if they wanted to look at that wire. I'd have them show me the manuals and procedures outlining that. :tdown:
 

chelo

filthy sy
Re: Argh, failed emissions

They checked timing with the light. Checked the tan wire. One station said if i could disengage the AWD. At the other station the guy even crawled under the truck making sure it was AWD. It seems nothing is getting better in California. Not even the weather.
 

TYTILIDIE

METH HEAD
Re: Argh, failed emissions

I didnt realize you could edven drive with that wire disconnected. Everytime Ive had it disconnected it tries hard to stall I have to be quick and crack the throttle to keep it going.
 

92boostedty

Senior Member
Re: Argh, failed emissions

mine wasnt goin too pass either untill the exhaust probe was stuck into a jeep that was infront of it :D
 

PPI Typhoon

DIY Madman
Re: Argh, failed emissions

TYTILIDIE said:
I didnt realize you could edven drive with that wire disconnected. Everytime Ive had it disconnected it tries hard to stall I have to be quick and crack the throttle to keep it going.

Yeah, it's pretty rough running compared to having it connected. Not to mention, when you hit the gas, it feels like you're driving on like 3 cylinders. BUT.......it gets you there and away with a pass slip. :tup:
 
Top