Atr Battery relocation

syty9933

New member
i took the atr tray and bolts off my brothers totaled typhoon and bent it back. It bolts on and the battery cables bolted on also. I dont have a fenderwell cover for it, and was wondering if i really need one or if i can use somthin else like a rubber flap or somthin else, also what do you guys do to hold the battery down?
 
Last edited:

syty9933

New member
Re: Atr Battery relocation

bump, just got my liscense and this is the last thing to do before i can start her up
 

SY2932

Administrator
Re: Atr Battery relocation

You WILL NEED that cover, it has a "lip" spot welded to the side that faces the battery to hold it down. It is at the bottom of the cover near the three holes in the pic below:

IMG_1749.sized.jpg

"ATR battery relocate cover and shim that I made so that it would close across the bottom."

One good bounce without this cover and you will have a NASTY electrical fire on your hands...
 

syty9933

New member
Re: Atr Battery relocation

You WILL NEED that cover, it has a "lip" spot welded to the side that faces the battery to hold it down. It is at the bottom of the cover near the three holes in the pic below:

IMG_1749.sized.jpg

"ATR battery relocate cover and shim that I made so that it would close across the bottom."

One good bounce without this cover and you will have a NASTY electrical fire on your hands...


:banghead: **** i dont have one so i cant start this truck now
 
Last edited:

SY2932

Administrator
Re: Atr Battery relocation

If you get a generic hold down from any chain auto parts store, you will be ok. Of course, it will require you to drill two holes in the bottom of the tray that the battery rests on to secure it... At that point, all you would need to do is fab up a cover to keep everything protected.

If you don't have fabrication skills, his up this member who made ATR repros for the relocation kit.
 
Last edited:

syty9933

New member
Re: Atr Battery relocation

If you get a generic hold down from any chain auto parts store, you will be ok. Of course, it will require you to drill two holes in the bottom of the tray that the battery rests on to secure it... At that point, all you would need to do is fab up a cover to keep everything protected.

If you don't have fabrication skills, his up this member who made ATR repros for the relocation kit.

is it possible to just take out the battery tray and put the battery below with some bungee tie-downs. I know people have fabbed stock trays to fit but is it safe for a while if i just drop the battery below without a tray??......... I just got my lisence and this is all i need to do to finish my month long project
 

AutoVation

Member
Re: Atr Battery relocation

If you get a generic hold down from any chain auto parts store, you will be ok. Of course, it will require you to drill two holes in the bottom of the tray that the battery rests on to secure it... At that point, all you would need to do is fab up a cover to keep everything protected.

If you don't have fabrication skills, his up this member who made ATR repros for the relocation kit.

The link you put is to a moderator only link.

If you can send me dimensions on that plate (and where you want the holes), I can probably make it for about $50 or so (~$70 if you want it anodized black). It would be about a week before I could get it to you.
 

SY2932

Administrator
Re: Atr Battery relocation

The link you put is to a moderator only link.

If you can send me dimensions on that plate (and where you want the holes), I can probably make it for about $50 or so (~$70 if you want it anodized black). It would be about a week before I could get it to you.


Oops, so it is. Dang being a MOD and seeing *everything* can be a pain sometimes :oops:. Ok, try this one then. Member "Sean Lauver" is the one who was/is making them BTW.
 
Top