ATR chip - good? bad?

TYTILIDIE

METH HEAD
My truck is pretty much stock but im wanting to start doing some mods and i was contemplating the ATR chip. Has anyone used it and if so do they suck or are they pretty good. Any thoughts would be appreciated.


Mike
 

SeattleSy#1255

Category 5 Conservative
if you can't get a custom one done, ultimate is the only way to go IMO...

of course with that you need a 3bar, fuel pump, and AFRP at the minimum.


LOL and IMHO....i'd say the first actual mod the truck (minus datamaster) is do the tranny Kaboom is normal for them and costly. Or maybe do the WG, or maybe do...oh ok i'll stop, its rediculas.
 

ZavzTy547

Senior Member
If your short on funds go with the ATR and upgrade to an ultimate when you have the 3 bar fuel pump etc...
 

TYTILIDIE

METH HEAD
I have looked everywhere ( maybe not hard enough ) and i can not find the ultimate to save my life. i wrote to some guy named brian who runs this site i guess and never heard from him so can anyone tell me where to get the ultimate? Thanks for all the other info.
 

sy538

New member
Are you serious?

http://www.raceprovenmotors.com/cart/index.php?cPath=43_126

But I would not suggest that you mod your truck yet.

Edit
That was kinda harsh so to give some more info,
Before you get a chip
Get datamaster and a cable from AKM
Get a fuel pump and IC pump from APE
Hotwire your IC pump and use ¾” heater hose
Get a deep transmission pan from summit

When you get an ultimate you will need a 3 bar map sensor, AFPR and/or manual boost controller, and maybe 50lbs injectors.
 

TYTILIDIE

METH HEAD
Thats good info to know. I actually ran into a guy yesturday who claims he can get the cable for $100 but well see. Never even thought about the tranny suckin more fluid cause ive never really had that problem before on the vette. The intercooler im trdin out for air to air. Fuel pump im not sure which one to buy, but from what everyone says the walbro is the best one. Already got the laptop but am having trouble gettin the datamaster program to it. Last but not least are 50# injectors really necassary? What are stock injectors rated at? Thanks for everyones input its a big help. Im not a total retard i actually built my tranny (first one ever) last year and its still solid as hell and the motor also, although i this is the 7th motor ive built. But i have to admit im semi new to turbo especially when it comes to the "tuning" part. Thanks again.
 

sy538

New member
Some of the ultimate chips are for stock injectors some are for 50lbs injectors. The stock injectors are 32lbs, read this
http://www.syty.net/phpBB2/viewtopic.php?t=35795
And decide for yourself if 50lbs injectors are necessary.

Get the 255 high pressure from APE
http://www.autoperformanceengineering.com/

AKM
http://www.akmcables.com/index.htm
Sells the cables for $95 shipped, and he sell datamaster registration cheaper then
http://www.ttspowersystems.com/index.htm
A lot of guys have had trouble with datamaster, I get a lot of errors but for the most part it works good for me so I cant help with that.

If you go very much faster then stock your transmission will break at some point but you can make it last longer with a big tranny cooler, a deep pan with heat fins on it and a lot of guys use a remote filter kit.
 
Top