Autotune warning cells???

907RedTY

New member
hey fellas

could someone explain to me what the warning cells in autotune mean.
BR=
BL=
TR=
TL=

thanks for the help guys
brian hewes
 
Last edited:

Quickstop [UK]

Combating adversyty.
Re: tunerpro4 warning cells??

Re: tunerpro4 warning cells??

It's a cell reference warning.

At the top of Autotune, you have in cell D8, VE warning level Delta where the Delta is the difference between the cells.

Anything over a difference of 5 VE between cells makes you possibly have a rough map. I say possibly as it's not always the case.

BL = Bottom Left
BR = Bottom Right
TL = Top Left
TR = Top right.

Look at the warnings and match them with the VE values in the CALCULATED column to see where there might be a large step in VE - this can cause bogging when the ECU moves from one cell to the next and there's a sudden increase/decrease in fuel.
 

907RedTY

New member
Re: tunerpro4 warning cells??

Re: tunerpro4 warning cells??

so would there be a recommended way to go with adjusting the fuel depending on the warning in that particular cell. just thinking out loud.
 

JSM

Active member
Re: tunerpro4 warning cells??

Re: tunerpro4 warning cells??

The thread is a little misleading as the issue your talking about is in the autotune spreadsheet which compliments TP4, but is not part of TP4.

Mark described the function right. Key is in general you want somewhat a smooth transistion between cells. Big jumps in #'s can cause problems. It is not ALWAYS avoidable though depending on what you consider a big jump, the truck, etc.
 

907RedTY

New member
Re: tunerpro4 warning cells??

Re: tunerpro4 warning cells??

You are one hundred percent correct I did mislabel the topic of the thread. I wasn't thinking about what I was wanting to know was in autotune. Thanks for pointing that out. Is there a way to change the title of the thread?? I got it
 
Top