i tried doing my first tune up before i had removed the metal IC lines.
doing the cap and rotor was a bitch with that IC hose in the way!!! not to mention it was the first time the cap and rotor had ever been removed in 12 years... so getting the rotor off was especially fun :roll:
when doing this make sure you seat the rotor on the dist. securely and push that bastard on there hard... i just popped mine on there gave it a lil push, then spent an hour putting the cap on (those lil screws are the devil!!!!) only to have to take them off and buy a new cap, cause once i tried to start the truck the rotor came loose, and took chunks out of the poles in the cap... frustrated and pissed off, i had to go back to autozone and get another cap and rotor.
as far as the plugs go... ive never taken the wheel well out, i just jack the truck up, take the wheel off so i got some room to work (put a towel over your rotor etc, so you dont get grease on your pants) then i use a 12" ext and a crapsman spark plug swivel socket... easy as pie, i wouldnt even attempt it without the extension or the swivel.
have dave help ya out and show you the ropes. i didnt really know jack shit about car maintenance before i bought my Sy, mainly cause i didnt really own a car i thought was worth the time to work on myself... but with the Sy, i feel a sense of accomplishment and gratification when i do a mod or repair that a shop wouldve charged me insane amounts of money to do, then i start thinking of more shit to buy with the money i saved doing the work myself
...and trust me the feeling you get after a kill is priceless, it makes dealing with this maintenance whore of a truck, all worth while.