Battery Tray

killa66cam

RIDIN DIRTY
Is the stock battery tray of a Syclone/Typhoon, the same as a S-10/Sonoma/Blazer/Jimmy? I have some kind of an aftermarket air box in my Typhoon...it is mounted in the location of the stock battery...the battery has been relocated to the inner front passenger fender area. The relocation and wiring job is a bunch of crap...to say the least. I am looking to put the battery back in the stock location, and I guess just put a filter on the end of the turbo. I will probably do an RPM intake at some point, but I don't want to spend the $250 right now. Looking for some answers and any suggestions. Thanks.

Cam
 

Nicks93

Member
Re: Battery Tray

Yes the battery tray is the same. As far as putting a filter on the turbo I am not so sure about that I am sure someone with that knowledge will chime in soon. I don't see why you couldn't!
 

Chest Rockwell

Active member
Re: Battery Tray

I'm not certain, but I'm pretty sure the battery tray is another syty-specific part. It's got a notch in a corner, to allow more clearance for the heater hose. Got pics of the current set-up?
 

Fighting5thSVT

Active member
Re: Battery Tray

A filter will not fit right off the turbo unless you either

a) relocate the overflow tank (as in the RPM or KB setup)

b) Move battery or use a smaller one in the stock location.

I chose to use a Braille No-Weight battery. Its a tight fit, but it works:2cents:

105_7580.jpg
[/IMG]
105_7585.jpg
[/IMG]
 

killa66cam

RIDIN DIRTY
Re: Battery Tray

I'm not certain, but I'm pretty sure the battery tray is another syty-specific part. It's got a notch in a corner, to allow more clearance for the heater hose. Got pics of the current set-up?

I don't have any pics currently. I may can get some and post them up. It looks like an ATR box that I saw someone selling on here not too long ago.

A filter will not fit right off the turbo unless you either

a) relocate the overflow tank (as in the RPM or KB setup)

b) Move battery or use a smaller one in the stock location.

I chose to use a Braille No-Weight battery. Its a tight fit, but it works:2cents:

Where did you get the battery from? What model is it? How much did it cost? Is it mounted in the stock battery tray? Who makes your air intake that you used in the photos? Sorry for all of the question. Thanks.

battery tray is sy/ty only

How would I go about getting a stock battery tray? From someone parting one out on here? Thanks.

Cam
 
Top