Best Ultimate Setting for Emissions test

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
I need to go thru inspection today and need to know what setting I should be on for the emissions test. I know that T1-16 has the EGR enabled but what about the Valet mode setting? Or T1-15? Let me know ASAP guyz. Thanx....
 

Loeryder

New member
I thought T1-15 was the only setting with EGR enabled but I could be wrong.

Pull your IC pump fuse and lower your FP if you have trouble passing.
Also may have to change a 160 thermo back to a 195 to get it hot enough.

Drive around for an hour or so right before you go in and try to leave your AC running during the test since it heats everything up.
The hotter it is the cleaner it will burn.

Best of Luck,
 

smeagol

Active member
I passed sniffer emissions without an EGR.

If your cal is close, running closed loop, it shouldn't cause problems.

It seems there are other factors that are more important.

-fresh tune up
-engine temperature (180-210)
-air temp into the motor (turn IC pump off if you can)
-catalytic converter in good shape
 
Top