Big Stuff Vs. old FAST Vs.What ever

Typhoonracer

Old Guard GURU
Going through the motor again and am considering a new fuel managment system...

Currently am running a old FAST W/ CC as the tuning software....Not self learning....

I do have 75 Lb per hour injectors that have been balanced and plan on keeping them.... Any opinoins are welcome!!

Time to get my brick runing again!!
 

Quickstop [UK]

Combating adversyty.
Re: Big Stuff Vs. old FAST Vs.What ever

TTV8Ty reports that his Holley Dominator setup is pretty awesome... Self learning apparently. :2cents:
 

qbnkiller

Conflaguration Specialist
Re: Big Stuff Vs. old FAST Vs.What ever

I have been running a B.S.3 for a few years now. It is a nice unit, but the new Holley setup is very good as well. If you already have an aftermarket ECM and it does everything you need, I don't know that I would replace it. You will need to familiarize yourself with it (or find someone who knows it to tune your truck).

If I were going to buy a brand new system today, it would be type Holley unit. That being said, I am still rocking the B.S.3 at the moment. The one thing I will strongly advise you on is to be sure you buy it from someone that will provide you with support after the sale. B.S.3 is not known for their sstellar customer service skills (they are pretty shitty on the phone).
 

Quickstop [UK]

Combating adversyty.
Re: Big Stuff Vs. old FAST Vs.What ever

I have been running a B.S.3 for a few years now. It is a nice unit, but the new Holley setup is very good as well. If you already have an aftermarket ECM and it does everything you need, I don't know that I would replace it. You will need to familiarize yourself with it (or find someone who knows it to tune your truck).

If I were going to buy a brand new system today, it would be type Holley unit. That being said, I am still rocking the B.S.3 at the moment. The one thing I will strongly advise you on is to be sure you buy it from someone that will provide you with support after the sale. B.S.3 is not known for their sstellar customer service skills (they are pretty shitty on the phone).

Get off the .net and fix your shit and post some awesome videos please :D

Back on topic...

:D
 

qbnkiller

Conflaguration Specialist
Re: Big Stuff Vs. old FAST Vs.What ever

hang about mate! I am travelling quite heavilylately, but I hope to have so.e time with it next week.
 

Windedv6

Ty n 10s
Re: Big Stuff Vs. old FAST Vs.What ever

Steve

Keep the unit you have. I run the same one I my AWD Ty with no problems. It's may not have all the bells and whistles as the FXi (which I run in my twin turbo setup), but it does the job very well without some of the complexities as with the BS3 and the FXi.

I would recommend the classic FAST to 95% of those running an aftermarket fuel management system in our trucks. It has everything needed and it's clean, simple to use. FXi and BS3 are only needed for those that are wanting /needing to run on the edge. The honest truth is, there are only a few that really play that game and can aford to rebuild multiple times. Just having a BS3, FXI or Holley system is not going to save a motor over common sense and a simpler system. A good solid simple system that can control all the basics along with comon sense is not only all thats required for our trucks, it's really what most of the built trucks really need so that the owner can understand and take control of their own tuning.

Maxtor's Sy is the board's best expamle of a clean simple system that is ultra reliable, user friendly (on the street or at the track) and fast. It runs on the Classic FAST.

Here to help if needed,
John
 

Ty 1885

Member
Re: Big Stuff Vs. old FAST Vs.What ever

I have been running a B.S.3 for a few years now. It is a nice unit, but the new Holley setup is very good as well. If you already have an aftermarket ECM and it does everything you need, I don't know that I would replace it. You will need to familiarize yourself with it (or find someone who knows it to tune your truck).

If I were going to buy a brand new system today, it would be type Holley unit. That being said, I am still rocking the B.S.3 at the moment. The one thing I will strongly advise you on is to be sure you buy it from someone that will provide you with support after the sale. B.S.3 is not known for their sstellar customer service skills (they are pretty shitty on the phone).

B.S.3 support is why i went with FAST XFI (works great)
 

VIPERRACING

New member
Re: Big Stuff Vs. old FAST Vs.What ever

Steve

Keep the unit you have. I run the same one I my AWD Ty with no problems. It's may not have all the bells and whistles as the FXi (which I run in my twin turbo setup), but it does the job very well without some of the complexities as with the BS3 and the FXi.

I would recommend the classic FAST to 95% of those running an aftermarket fuel management system in our trucks. It has everything needed and it's clean, simple to use. FXi and BS3 are only needed for those that are wanting /needing to run on the edge. The honest truth is, there are only a few that really play that game and can aford to rebuild multiple times. Just having a BS3, FXI or Holley system is not going to save a motor over common sense and a simpler system. A good solid simple system that can control all the basics along with comon sense is not only all thats required for our trucks, it's really what most of the built trucks really need so that the owner can understand and take control of their own tuning.

Maxtor's Sy is the board's best expamle of a clean simple system that is ultra reliable, user friendly (on the street or at the track) and fast. It runs on the Classic FAST.

Here to help if needed,
John

Ditto. I also ran the FAST unit and it worked perfectly.
 

Typhoonracer

Old Guard GURU
Re: Big Stuff Vs. old FAST Vs.What ever

John,

I may take you up on your offer...
I need a good base line to start over from...the laptop I had all my old CC config files has died and I cant find any of the floopies that had old CC files on them...
Hence the reason to consider starting over...

I need to get the battery replaced and see if I can access the ECM... Any one got a copy of CC I can use?
 

Poconojoe

Donating Member
Re: Big Stuff Vs. old FAST Vs.What ever

As far as your laptop dying I recently had it happen to my tuning laptop and I needed a lot of the files from it, so I went on ebay and bought an idintical one and traded out the hard drives and was back in business without losing much. Depending on what your laptop issue is, this might work for you
 

RealFastV6

@jb_and_his_coffee
Re: Big Stuff Vs. old FAST Vs.What ever

John,

I may take you up on your offer...
I need a good base line to start over from...the laptop I had all my old CC config files has died and I cant find any of the floopies that had old CC files on them...
Hence the reason to consider starting over...

I need to get the battery replaced and see if I can access the ECM... Any one got a copy of CC I can use?

You can still download the old C-COM WP here:

http://www.fuelairspark.com/Pages/296/Software.aspx

(About 3/4 of the way down)

If you want the DOS version, I'm pretty positive I have it on my laptop still - let me know.

How "dead" is your laptop?
 
Top