Bigstuff guys little help!

Neelsonwheels

Donating Member
So the truck runs okay and the dizzy is locked out and all that.(had to pull the dizzy to add an oil pressure pick up). I am getting my feet wet with the Bigstuff program and have been doing some mock tuning offline. I was in the program yesterday and was trying to do a cam sync ( did I mention connected to the truck real time). The truck was idleing at 1000rpms and the ECM was calling for 800 rpm idle warm. The truck was up to operating temp.
I think this is a timing issue(not sure). The timing in the ecm seems to match exactley what my timing light is saying. I don't know what to make of that. I checked the TPS settings and it is saying 4% at idle is this right? Maybe it should be zero? Could this be the cause of the 1000rpm Idle? On to the camsync please correct me if I am wrong. I am supposed to connect timing light to number 1 cylinder and in the program open individual spark setting and retard the timing for #1 by 10degrees and verify that it actually retards with the timing light. Is this so? any help would be great. I know I sound like a dumbass but I am really not. I just hate no knowing how this stuff works and not knowing how to fix it. I also don't like relying on other people.
Thanks
Jeff
 
Top