Black box chip??

gjp

another post whore
My truck came with a black box mounted on my passenger kick panel. I was told it was an ATR chip. It uses a key to change settings. anyone have info on what it does??? Is it setup for a 3 bar map. I can use any info. When I get my datamaster can I use that to give me more info on the settings? Thanks
 

gjp

another post whore
Re: Black box chip??

Thats exactly what it looks like but has no labels. Thanks. Is this the only one like that so I can do some research.?
 

gjp

another post whore
Re: Black box chip??

I opened it up. Inside it has 2 chips With blue covers. One of them has 2 programs I guess with an arrow pointing to each side of the chip in black marker. One says "origional code aybm-4053" the other says "1141067" . the other chip is blank. The keyswitch has 5 positions with one being the kill switch. I guess I have 2 blank settings??? I am very new to the sy works and I have never seen this type of computer control. My last cars have been a 72 elcamino. (blown 396). 57 chevy belair (327) and my 2000 GTP. I had a whole new coputer on my GTP Programed with my mods. This thing looks out of date. Up untill now I have just driven the truck. Soon I want to add Alky injection and try to tune for mid 12's. I just want to see what all I have.
 

gjp

another post whore
Re: Black box chip??

Ok I took a better look at it. One chip is the stock delco it says "delco AYMB 4053" the other chip has a sticker on it that says " Pitbull Sy137 1993" has a Has a "A" marked on it with a pen and an install date of 1/94. Also has a label "applied tech & research"
 

gjp

another post whore
Re: Black box chip??

Ok I searched. Its a street chip. The ribbon connector was also loose. perhaps that is what was causing my idle problems. So when I go to Alky injectionI want to run up to 18lbs of boost. The street chip is good for 15lbs, correct? I will need a new one and a 3 bar too???
 

cloneman315

Active member
Re: Black box chip??

u will def need a 3 bar i woul drecomend getting a new chip contact turbo 6 he has some really goond programs at great prices,they include the switcher and everything except the 3 bar map
 

gjp

another post whore
Re: Black box chip??

Can I just get my pitbul chip reprogramed or use the system I have now with a new chip in place of the pitbull one?? Also Is it possible to replace my delco one with the one made after the 1200th sy for better stock driveability. When I get the 3 bar map would I have to run the 3 bar chip only? not 100% sure how that works.
 

92 Ty 1173

Active member
Re: Black box chip??

ATR and stock chips are only compatiable with 2 bar MAP's. In order to get proper fueling/timing and for the computer to read more than 14.7psi you need a 3 bar MAP and a 3 bar chip. I have an Ultimate which can be programed to your mods. It has different setting which can ve changed with the push of a button. They range from stock boost and timing to 24 psi with a timming curve to match. The T-3 24 psi is for use with a high octane fuel. The ultimates are currnently only avalible used and come in two styles, radar and 2-1/16 gauge. The Ultimate is not the only one out there so do some research and ask Q's that's what this board is here for. You'll find it to be better than any manual you could ever read. Good luck.
 

gjp

another post whore
Re: Black box chip??

The Ultimate is not the only one out there so do some research and ask Q's that's what this board is here for. You'll find it to be better than any manual you could ever read. Good luck.

Yes this site ROCKS!

I will upgrade to an ultimate chip when I am ready to run more boost. Soon as I get my tax return I will be adding alcohol injection, chip and 3 bar map. I dont plan on adding much more then that for a while. in a few years I want to do a full rebuild with a bigger turbo. Thank you for the info. I have learned so much from reading on this site.
 
Top