broken wire

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Just finished everything under the truck with the engine install and went up top and was sorting out the wires and found this.

TYBrokenWire.jpg


comes out of the main harness at the Y

TYBrokenWire2.jpg



The only wire I could not find was the plug for the knock sensor. I don't remember if we even hooked it up with the accell dfi gen 7. Anyone know what this goes to?
 

Sportmachines

Active member
Re: broken wire

Knock sensor wire is blue. And if I'm seeing the colors right, black and tan, could it be the ring terminal ground that goes to the back of the head?
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: broken wire

that makes sense i didnt see ground wires. still didnt see the knock sensor wire either though. it was late and i didnt look hard. ill have to check again tonight.
 

BoostedSUV

Active member
Re: broken wire

The knock sensor is a long single wire that comes out of the harness and when its disconnected it falles down on top of the trans. I've had to hunt for it myself a few times.

As for those 2 wires I'm with the above. Those are the grounds that go to the back of the head. Just stick a 3/8 eyelit terminal on them they're good to go.
 

Syclone22

Member
Re: broken wire

that makes sense i didnt see ground wires. still didnt see the knock sensor wire either though. it was late and i didnt look hard. ill have to check again tonight.

Is your oil pressure plug still in tack those have two wires :tup:
 
Top