cam info needed

gobabygo

gobabygo

New member
what are specs on a 422 cam? i am building a good strong engine and not sure of the combo i should use. i hear everyone talking about a 422 and was just wondering. i am using stock block,eagle rods,je pistons, vortec heads, 70mm turbo,3000 converter,roller rockers, headers, good exhaust system(NO converter) ,good fuel system,custom sheet metal intake,larger throttle body and a full msd ignition, just not sure of the camshaft i should use. anyone have any idea of the cam i should use with this combo? :tup:
 
wildphil

wildphil

I Love My Ty's
Re: cam info needed

The 422 would work fine. Many other have used it with good success. You could get a custom cam designed for a turbo motor from Comp. For the same price as they charge for a 422. You can call and talk to one of there engineers and they can help you. They can set you up with the correct springs,retainer,etc.
 
gobabygo

gobabygo

New member
Re: cam info needed

I have a good friend that's works at comp cams. I asked about a 422 and he said they had a 252/.425 lift with a 110 lobe separation. Didn't know if that was the same or not.
 
Icarus-54

Icarus-54

Donating Old Member
Re: cam info needed

422 is .500 intake,.510 exh.@ 1.5 rocker.lsa is 114,w/110 intake center line
 
You must log in or register to reply here.
Top