camshaft question

[wayne74447]

i am looking at this cam, i am wonsdering if it is too much cam for a turbo?

Lobe center 108 degrees
advertised duration intake:280 Exh:288
Duration @.050 intake:226 Exh:232
Lift Intake:.474 Exh.484

I am not one on cams, but my buddy runs this cam in his NA 4.3 and it hauls, i know it is a bit wild but would it work for a turbo app??

wayne

 

[nightdiver]

Not good for you ...too much overlap , late boost ,less vacuum
If you want a cam pick one with max lift and a bit milder degrees
Dont forget its all about the combination though

 

[ghettosled]

Depends on your motor combo, and hp goals are but the lobe center would be way low for a turbo motor. Try around 112 or higher. ALso your EMS or chip will determine what limitations you have.