can cold weather cause code 31 ???

dirtdemon

"mr. ghettowrench"
got no overboost issues - till today :(
was snowing outside around 0°C - put pedal on the metal and : cutoff w/h enginecheck flash - pulled code 31 ...
im so confused about that - was rolling at ~5mls, kickdown and ... FAWK ::steamer:

... is it possible that the outsidetemps can cause overboost ???

is lengthening the WG-rod really a cure or only gone-by-thingy :roll:



btw.: did already a search, gonna check those rubbervaclines on the turbo, but i dont think thats the prob (fixed em bout one year ago) - what else could have happend ???

please :repost: ASAP

TIA, pat.
 

BillC

New member
Re: can cold weather cause code 31 ???

Yes, cold weather can cause this, especially if you've removed the cat. Generally, the larger the temperature difference between the exhaust and the outside air, the more boost a turbo will make at a particular load setting (makes the turbo more efficient).

Of course, that's also why turbo'd vehicles are usually more fun to drive when it's cold out. :D
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

@ billC :

thx a lot, man - thats a statement :tup:
yes, i did delete the cat (read my thread, huh?) but never ever had overboost ...

was suprised, because did happen to me the first time - so i can blaim the weather, right :rotf: :rotf: :rotf: ?

knew that the stock-WG is on its limit with the setup i have, but was really a fawkin experience at WOT ...

more fun, hmmm - cant tell, IMO the ironpig is running much cleaner around 25°C, recognized that since the coldair intake - the typhoon is more senisible to the outsinde temps now :squint:

will have to teach my right foot in being more kind *gg*

... and the WG-rod lengthening-thing :
cure or just $hit ???
 

BillC

New member
Re: can cold weather cause code 31 ???

dirtdemon said:
... and the WG-rod lengthening-thing :
cure or just $hit ???
Mostly, it's a cure, but it can be the other thing, too. :lol:

As long as your wastegate has sufficient flow capacity, lengthening the rod will help reduce overboosting. However, when you reach the point where the wastegate hole isn't physically large enough to divert enough exhaust, then no amount of adjustment will work.

The other drawback to adjusting the wastegate rod, is that you'll get much slower spoolup when the weather warms up -- it's a side effect of the wastegate opening sooner. You can always re-adjust it later, but it's a pain.

P.S. Just guessed on the cat -- the overboost only seems to happen on stock-ish trucks with the cat removed.
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

BillC said:
P.S. Just guessed on the cat -- the overboost only seems to happen on stock-ish trucks with the cat removed.

... stock-ish *eeek* ???

motor-mods yet :
255 FP, AFPR, flowjet ICpump, 3" ATR cat(less)back, coldair, STG 10n1 ... can u say stock-ish ???

am i not worthy :turbo: ??? *ggg*

honestly, what would u suggest to get the overboost under control ... ???
... i was thinking on making an elbow-pipe between turbo and the upper IC with a built-in popoff-valve - will this solve the problem ???
any opinions ???

or should it be ok, to fire it up only at warm weathers :lol: ???
 

bezerk

New member
Re: can cold weather cause code 31 ???

popoff won't help, adjust the FAWKING rod.
or buy my external wastegate, and be over with crappy stockish wastegate design.
(1 more mod you can ad :))
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

... external wastegate , huh ?

where to mount ?
what price ? (pm. me?)
what to do with stock WG ?

arrrgh, totally confused ...
 

bezerk

New member
Re: can cold weather cause code 31 ???

you can weld it on your crossover.
around €250
you can port it, but it's a tight spot, and not worth the hassle IMO
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

aaarg, thats what i tried to left undone ... the crossover !

but it sounds like the thing im talking about , location switched between upperIC and turbo - shit ???

...
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

bezerk said:
you can weld it on your crossover.
around €250
you can port it, but it's a tight spot, and not worth the hassle IMO

as IMO :roll:

what about the location of an ext.WG between the upper IC and the turbo ???
 

bezerk

New member
Re: can cold weather cause code 31 ???

you cannot mount a External wastagte there, because your Wastegate is venting to keep the boost you have setted not more.
if you put it there, the turbo will overspinn, and you will have to rebuild your turbo
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

oh :oops: thats not my intension ...
... sounds logic what u r saying :eek:

so can i say that, if my truck havent had overboosted ever since (but today - cold outside :roll: ) the WG is adjusted well ???

is it possible that the adjustment sucks due time ???
 

bezerk

New member
Re: can cold weather cause code 31 ???

dirtdemon said:
oh :oops: thats not my intension ...
... sounds logic what u r saying :eek:

so can i say that, if my truck havent had overboosted ever since (but today - cold outside :roll: ) the WG is adjusted well ???

is it possible that the adjustment sucks due time ???

just give it a turn or 2 and see if it does it again, and it's because of your missing Cat
 

BillC

New member
Re: can cold weather cause code 31 ???

dirtdemon said:
... stock-ish *eeek* ???

motor-mods yet :
255 FP, AFPR, flowjet ICpump, 3" ATR cat(less)back, coldair, STG 10n1 ... can u say stock-ish ???

am i not worthy :turbo: ??? *ggg*
Didn't mean that as an insult, and it's certainly not a sign of disrespect. But, since you still have the stock injectors, turbo, heads and intercooler, yeah, it's still stock-ish. :p

Basically, the big clue was the overboosting -- normally, anytime you replace the turbo, you also get a better wastegate (either internal or external) and eliminate overboosting permanently.
 

dirtdemon

"mr. ghettowrench"
Re: can cold weather cause code 31 ???

BillC said:
Didn't mean that as an insult, and it's certainly not a sign of disrespect. But, since you still have the stock injectors, turbo, heads and intercooler, yeah, it's still stock-ish. :p

Basically, the big clue was the overboosting -- normally, anytime you replace the turbo, you also get a better wastegate (either internal or external) and eliminate overboosting permanently.

... oh i see :doh:

- no prob, wasnt about the disrespect - but thought my truck is with the "should have" things and even not stock any more ... ;)

is it possible to get a better WG that fits the stock turbo (was rebuilt and does very fine...) ? :eek:

TIA, pat.
 
Top