can i run just the downpipe????

nick041881

Member
just got through with emissions and wanted to see what the trucks like with no cat just for shits and giggles. is running strait downpipe ok to do just for a little while???maybe not enough backpressure?
peace,
nick
 

apple_juice

New member
If you have a Ty and did't put a turn down on the end of the DP, then you will be smelling something funny soon. The smell will be your carpet melting in front of the back seat.
Ed
 

SyTyJedi

Jedi Council
The exhaust housing is the source of all the backpressure in the stock system after you get a good exhaust.

There is no such thing as too little backpressure in a turbo application. Less is better.


Edit: removed a dumb typo





_________________
Tyler
leftsmall.JPG


<font size=-1>[ This Message was edited by: SyTyJedi on 2002-03-06 14:00 ]</font>
 

jwaller

Evil Genius/SyTy Guru
tyler are you smoking crack....no such thing as too much back pressure?...thats total BS..you want the least backpressure you can get if your wanting peak hp..but you want "some" backpressure so that spoolup wont be slow as mud....usually you want 1.0-1.2 times the boost pressure in the exhaust. so if you have 20psi boost, you want 20psi in the exhaust that makes for good spoolup
 

Eluding

New member
I have a cutout in my stock downpipe before the cat which I run open at the track. I better my times by .2 and 2 mph. No overboost.
 

Ian Turgeon

Cascading Inspiration
the floor is going to get nice an warm on the passanger side, but I think its doable. Jordan's truck ran with just the dp for quite some time here in FL. With his 44, the truck sounded awesome. Expect to grab attention with the noise.
 

SyTyJedi

Jedi Council
On 2002-03-06 09:46, jwaller wrote:
tyler are you smoking crack....no such thing as too much back pressure?...thats total BS..you want the least backpressure you can get if your wanting peak hp..but you want "some" backpressure so that spoolup wont be slow as mud....usually you want 1.0-1.2 times the boost pressure in the exhaust. so if you have 20psi boost, you want 20psi in the exhaust that makes for good spoolup

Whoops! Typo! I meant to say too little backpressure, that's what I get for posting late at night. :wink:




_________________
Tyler
leftsmall.JPG


<font size=-1>[ This Message was edited by: SyTyJedi on 2002-03-06 14:00 ]</font>
 

nick041881

Member
well no dp is loud as hell!!!!!! truck feels faster though! i think i am going to weld on a glasspack type muffler to quiet it down a little. (at least until i get my new turbo) i wonder how much faster it will run at the track ?
peace,
nick
 

SY732

New member
On 2002-03-07 00:50, nick041881 wrote:
well no dp is loud as hell!!!!!! truck feels faster though! i think i am going to weld on a glasspack type muffler to quiet it down a little. (at least until i get my new turbo) i wonder how much faster it will run at the track ?
peace,
nick

.2 with fuel
 

SY732

New member
i wonder how much faster it will run at the track ?

It will be about .2 seconds faster IE if you were running 13.6 you should run 13.4
with fuel, IE correct octane and pressure

You will need more fuel (octane and pres) more air more fuel and boost will be more likely to spike, with my SY I went form 17 psi before to 22-23 psi spike in first with only the downpipe

_________________
KO
SY732
ST 12.4@105
FOR SALE

<font size=-1>[ This Message was edited by: SY732 on 2002-03-07 14:31 ]</font>
 
Top