Can I swap between code 58 and 59.

bender

Member
I am thinking of getting into code 59, and want to know if it is possible to tune on the truck, then switch back to my Hood upgraded stock chip to drive, then back to 59 for tuning until I get it dialed in 100%.

Or will having a 3 bar map not work at all with the 2 bar chip. I would install a wide band also but I believe hoods reprogrammed chip was patched for wide band use.
 

MRKING

New Parts for Old Trucks
Re: Can I swap between code 58 and 59.

If you have an ostrich you can swap between $58 and $59 bins on the fly . No you cant use a 3bar bin with a 2 bar map sensor . If the "hood" bin has a wb patch , that means the wb should be hooked up and hardwired in .
 

bender

Member
Re: Can I swap between code 58 and 59.

If you have an ostrich you can swap between $58 and $59 bins on the fly . No you cant use a 3bar bin with a 2 bar map sensor . If the "hood" bin has a wb patch , that means the wb should be hooked up and hardwired in .

Yeah thats what I would do, replace the narrow band with the wide band and wire into the ecm, and leave that in all the time. As far as the bin, I am wondering if after I replace the 2 bar sensor with a 3 bar for tuning purposes, will I be able to run my stockish chip without switching back to the 2 bar map sensor.
 
Re: Can I swap between code 58 and 59.

No. A 2 bar chip will not work correctly with a 3 bar map. You will have to swap maps every time you swap bins.

Someone even answered it already. Take the time to read. They took the time to post, so at least give them enough respect to read their replies.

No you cant use a 3bar bin with a 2 bar map sensor
 

bender

Member
Re: Can I swap between code 58 and 59.

Someone even answered it already. Take the time to read. They took the time to post, so at least give them enough respect to read their replies.
No you cant use a 3bar bin with a 2 bar map sensor

I saw that but wanted to know about a 2 bar bin on a 3 bar map, not vice verse.

So is it possible to convert the bin I have to 59 and just run that or would I just use some other bin from the 59 forum.

Dont mean to be a bother, but I have read so much in the past two weeks I cant remember what is what. I dont want to throw down the money for all the stuff I need before I know a little of what I will be doing.
 

WyoSyclone

Active member
Re: Can I swap between code 58 and 59.

You'll need a 3bar Code59 BIN to run with the 3 bar map. You won't be able to convert a 58 BIN to '59.... you'll want to download the appropriate BIN from the '59 site and start your dial in procedure from there.
Once you start tuning with '59 it won't take that long to have it up and running...I had mine pretty much dialed in for just cruising around in an afternoon..... working through the details for boost/timing/expanded rpm range will take a bit of time, but it's fun once you get the hang of it.
 

bender

Member
Re: Can I swap between code 58 and 59.

Thank you, I appreciate the help. I have been going back and forth on whether to get into code 59 or not. I sold off all my home brewing gear so I can play with the truck, so I think I am going to do it now.
 

WyoSyclone

Active member
Re: Can I swap between code 58 and 59.

Thank you, I appreciate the help. I have been going back and forth on whether to get into code 59 or not. I sold off all my home brewing gear so I can play with the truck, so I think I am going to do it now.

You'll love it once you get into it... I can help you get started. Do you have DataMaster? I haven't gotten into the V5 version of TPRT much yet, but it is supposed to have some cool logging features as well. I generally use DM for logging, then TP for the BIN work of course... is just easier for me for some reason.
 

bender

Member
Re: Can I swap between code 58 and 59.

You'll love it once you get into it... I can help you get started. Do you have DataMaster? I haven't gotten into the V5 version of TPRT much yet, but it is supposed to have some cool logging features as well. I generally use DM for logging, then TP for the BIN work of course... is just easier for me for some reason.

Yes I do have dm. I had tunerpro for a while playing with its logging or monitoring when I had a borrowed aldl cable, I have since reformatted my laptop and just have dm 3.3.0.
 

Treymen

Donating Member
Re: Can I swap between code 58 and 59.

Thank you, I appreciate the help. I have been going back and forth on whether to get into code 59 or not. I sold off all my home brewing gear so I can play with the truck, so I think I am going to do it now.



Once you get familiar with it, you can help me too....LOL
 
Top