Can someone help read my Datamaster File?

Syclone#1992

SyTy.net Moderator
Please list your email and I will send you it.


My mods are:
ATR Chip*---might change this
ATR Cat and Exhaust
ATR Pulley
ATR Cold Air Kit and K&N filter cone


I need to know what is causing the knock after I let off the gas while in boost. I am also getting knock when building boost in a higher gear at lower RPM's. When at 11-13 PSI I am getting 1-4* of knock{which I can live with} According to the Service Manual my maps look a little high and I need advice there. My volts don't look to horrible either.

Any help is appreciated. Please write down email like I said and I will be glad to send the file. :p
 

Syclone#1992

SyTy.net Moderator
Can anyone else help? I know there are some more people that can help. I didn't buy this Datamast program for nothing.


Thanks for those who have replied already.
 

sy2185

New member
your rich/lean indicator on the upr. right shows rich nearly the whole time you have KR. Don't know what that means, just saying. Also your engine seems pretty damn hot. I saw under hood temperatures drop by a hundred degrees w/ a switch from 195 to 160 thermo. Had a 180 inbetween and wanted cooler. Read today on a Buick site about false knock causes- do you have forged pistons? Said certain varieties emit piston slap noise that's the same freq. as knock- also some cams can cuase headaches. How's it look at WOT to like 100mph with a 6-10 psi launch? Do you have an Adj. FPR? Is the vacuum line to it (stock or adj.) split or leaking?Are any vac. lines? What's the fuel pressure? Most importantly- Do your SPARK PLUGS indicate knock? Lastly check your grounds! The sy/ty supplement says ther's 20 grounds on the truck.
These things dropped my KR on 91 octane at the track to a high of 2.2 when the TC locked and when it shifted to 2nd. With 3 gals. Xylene and 10 91 oct. I peaked at .5, but that day was 15F cooler. Now I've got an SMC alky kit and see 20 deg. advance under boost while spraying. Thinking 20+psi doesn't sound all crazy.
Just keep on it- worked for me. Good luck.
Jeremy
 

Syclone#1992

SyTy.net Moderator
As far as the temps go I was running the truck a lot before the run to get datamaster and figure it out. I have a 160 degree thermostat to put in it.

About the rich/lean problem, would a Walboro and a AFPR help this out? What else should I do ?

Does anyone have a theory to back up this false knock thing? If there is false knock, then how do you know when it is real?

Any other suggestions?
 

sy2185

New member
real knock shows on the plugs. On the list there was a discussion about the leanest cyl. recently. Check there first. If no knock indicated, go from there.
Jeremy
 
Top