CF cowl hood interest

Status
Not open for further replies.

SYO237

SyTy Registry
I'll start this out with I am not promising anything, but the possibility is very good at this moment.

Looks like I have the chance to make a CF cowl hood that will be sponsored out of someone elses pocket and not mine (that is a motivator for me). The mold will be made from an aluminum cowl with the centerline reversed from stock...aka, instead of the center ridge being like stock and popping up, it sinks in. Anyone who has seen Harmon's truck has seen the hood. I believe its a 2-2.5" cowl:

http://i33.photobucket.com/albums/d66/epix1718/SyTy Nats 11/IMG_3397Large.jpg

The hood would be a bolt on (though I guess it could be made with just a skin for anyone who wants pin-on). I could make it in both 100% CF or 1 layer CF backed by fiberglass cloth/chopped strand matte. The CF/FG mix would still be light. I do vac infused pieces, NOT hand laid crap. I would do vinyl ester resin or the option of epoxy. For anyone who saw the CF IC covers, my work is geared not only towards strength/lightness, but I am very meticulous about details. I HATE wavy cloth.


Here is where I need the interested people's input. What would you pay for a hood like this...either 100% CF or CF/FG mix. I am talking a realistic price.

I have estimated about how much material alone would cost (not including time/labor), but want to see what you guys think is a fair price before I say anything. It comes down to time and money for me. I'll be up front...if the price of what people would buy it for comes out to little to no profit on my end, I wont even consider making the hoods other than who is sponsoring the project and for myself. I'll sell the mold at that point. No trying to sound like a punk about it, but doing any quality CF piece...especially a hood that EVERYONE looks at is very time consuming. I have to make some sort of profit to make it worthwhile...I got bills to pay too. ;)

To keep cost low, I wont offer the hood painted. It'll look badass right out of the mold, but it would be highly suggested to have it cleared or painted. So it will be up to you to have the hood cleared if you wanted to leave it raw CF or paint it black, etc.

Again... this is only an interest thread at this point. NOTHING has been started....and there is a chance it may never happen too. Keep that in mind, I dont want to pump everyone up saying its a go and then have it not happen.

Blast away with comments....
 

hatrik8

Donating Member
Re: CF cowl hood interest

$800 shipped? (super packaged and protected of course)

I think I could justify spending that much if it looks great.
 

blk00z28

Forced to by choice
Re: CF cowl hood interest

I assume it wouldn't have any bracing in it, or would it similar to stock bracing?
 

SYO237

SyTy Registry
Re: CF cowl hood interest

I assume it wouldn't have any bracing in it, or would it similar to stock bracing?

If its going to be bolt on, yes it will have bracing.... I'll see if Harmon can snap a pic of the underside of his.
 

blk00z28

Forced to by choice
Re: CF cowl hood interest

Alright, I guess what I'm getting at us will it offer more clearance then a stocker?
 

SYO237

SyTy Registry
Re: CF cowl hood interest

Alright, I guess what I'm getting at us will it offer more clearance then a stocker?

clearance for intake and such? honestly, I have no idea. Harmon could probably chime in on that one since he has the hood on his truck already. If I have to guess, id probably say that the bracing is setup similar to a stock hood, so it wouldnt give away to that much more clearance if any. I love to do the hood with a smooth underside surface like my harwood, but the reality of doing that drives cost up....way up....since Id have to finish out 2 sides.

This is good input though, stuff to consider.
 

Syclone Rob

Its all ABOOT the SYTY eh
Re: CF cowl hood interest

Will it have provisions to mount the under hood light? Also, do you think its possible to have it work with phil's hood strut?
 

SYO237

SyTy Registry
Re: CF cowl hood interest

I'd be interested In one, maybe even a stock flat hood in C/F?

Im not doing a stock hood. It's not being funded, so not spending extra money, sorry. Making the mold is $$$$$.

What would you pay for the cowl though?
 

SYO237

SyTy Registry
Re: CF cowl hood interest

Will it have provisions to mount the under hood light? Also, do you think its possible to have it work with phil's hood strut?

If it has a brace structure, sure you can mount the light.

Work with phils kit... good question. I had his kit on my FG harwood and it ripped right out after awhile due to the pressure of the shocks phil uses. It was just to much and the hood failed at the screw points. I even when so far as to cut the section out on my hood and reinforce it up and it still cracked out over time. It wasnt so much the opening action, it was the closing action and the pressure you need to get the hood down and then latch it. If I was to do it again, Id consider putting a small metal plate in that area to work for those who wanted it. Its just the smart way to do it i think.
 

dgoodhue

BuSTeD 4.3
Re: CF cowl hood interest

If it has a brace structure, sure you can mount the light.

Work with phils kit... good question. I had his kit on my FG harwood and it ripped right out after awhile due to the pressure of the shocks phil uses. It was just to much and the hood failed at the screw points. I even when so far as to cut the section out on my hood and reinforce it up and it still cracked out over time. It wasnt so much the opening action, it was the closing action and the pressure you need to get the hood down and then latch it. If I was to do it again, Id consider putting a small metal plate in that area to work for those who wanted it. Its just the smart way to do it i think.

I think to use Phil's hood kit that you would need to use different shocks. I think he even mentions this in his instructions.
 

T-Bone

Active member
Re: CF cowl hood interest

Adam, if you go with a 2" rise CF, I will front the money for one to use on the Sy. Thanks.
 

gstjohn

Sycloned S-10
Re: CF cowl hood interest

I'd pay 800-850 shipped for the hood. The flat hood was just a suggestion. I'd still get one if it had a rise to it. How big of a cowl rise are you looking at doing? 2"? Or more?
 

sy2585

MELS SY
Re: CF cowl hood interest

very interested in cf hood but have no idea on cost and i know it wont be cheep..
 
Status
Not open for further replies.
Top