cheap parts

[JuStBlAzIN]

Complete center console w/NO SHIFTER...ok conditions..great for a spare...includes bracket, console, console comparment box, lid, and shifter indicator cover. Pending payment.

OEM wheel...$50 +shipping.

OEM GMC grill...pending payment
REPLICA GMC grill...pending payment
Tyler 8mm Wires, black...the ones u have to cut to length....$40+shipping

Bilistin coil-over shocks. these are the custom racing spec. They were the ones that went with the PEP setup. I believe they have a 2.5" spring...have less than 100 miles on them...looking to get $700 +shipping

I beleive that is it. I clean out my house and through too many things away. Make me an offer these things are just taking up room. Pictures to come.


FRED

PICTURES : http://rides.webshots.com/album/550520725RksDjO

 

[T-Bone]

Re: cheap parts

Calling DIBS on the harness until Norm can check in (will quickly notify him).....he really needs an uncut engine harness and that is a fine price IF it is not all sliced up.

I'd like pics on the center console piece please and will make a decision upon viewing it.

Thanks Fred.

 

[NJ93TY]

Re: cheap parts

I would like to see pics of the front coil over's. I call dibs on them pics pending. Also I believe ED Hess still needs a grill, he was asking me a week or so ago. You may want to check with him. Thanks.

 

[crazykaese]

Re: cheap parts

Freddy - I'll take the incomplete console and the OEM and aftermarket grills if they are black. We spoke awhile back about the console parts - let me know if this is still the same console. I have an incomplete one as well - I can make one good one outa the two I'm sure. Thanx.

 

[fivetodrive]

Re: cheap parts

I could really use the harness for crispy. I have so many burned wires it is not even funny... I have seriously been thinking of hiding all of the wiring and this would make it possible... PLEASE... I could then pay it forward for some of the guys that need a perfect engine harness... and I guess 3rd in line on the conosle... I think the extended cab syclone could use one...

Aaron

 

[bezerk]

Re: cheap parts

dibs on steering wheel depending pics

 

[JuStBlAzIN]

Re: cheap parts

Calling DIBS on the harness until Norm can check in (will quickly notify him).....he really needs an uncut engine harness and that is a fine price IF it is not all sliced up.

I'd like pics on the center console piece please and will make a decision upon viewing it.

Thanks Fred.

Sorry Man Harness is currently spoken for. Reason why it is so cheap is that its a box of harness..i am unsure it is is hacked up or not. I'll let you know if the person backs out.

I would like to see pics of the front coil over's. I call dibs on them pics pending. Also I believe ED Hess still needs a grill, he was asking me a week or so ago. You may want to check with him. Thanks.

I will get you pictures later tonight.

Freddy - I'll take the incomplete console and the OEM and aftermarket grills if they are black. We spoke awhile back about the console parts - let me know if this is still the same console. I have an incomplete one as well - I can make one good one outa the two I'm sure. Thanx.

Was this the one we were talking about? Because I also have a spare bracket for ya. If the console is what we talked about then you have first calls on it. I will get you pictures of both grills.

I could really use the harness for crispy. I have so many burned wires it is not even funny... I have seriously been thinking of hiding all of the wiring and this would make it possible... PLEASE... I could then pay it forward for some of the guys that need a perfect engine harness... and I guess 3rd in line on the conosle... I think the extended cab syclone could use one...

Aaron

Aaron, I have replied back to your P/M.

dibs on steering wheel depending pics

Sorry No steering wheel is available.

OK guys i take Cash(paypal), Or Cladding as payment.

 

[T-Bone]

Re: cheap parts

Freddy - I'll take the incomplete console and the OEM and aftermarket grills if they are black. We spoke awhile back about the console parts - let me know if this is still the same console.

For the love of Pete, is there NO flippen etiquette around here anymore?? If you guys talked about it, either you (CrayKaese) should have bought it OR it should not have been posted on here for public sale. I'd think you would have called dibs if I made the decision to pass. It's cool though, what goes around comes around and I didn't need it anyway.....just didn't want to hack up my MINT 93 console in case someone else on here needed a nice one . Take me completely off the list as a buyer since I was passed over.

 

[Norm]

Re: cheap parts

I will take the harness.Hacked or not, $50 for a harness, will work for me.Let me know the details for payment.

 

[JuStBlAzIN]

Re: cheap parts

For the love of Pete, is there NO flippen etiquette around here anymore?? If you guys talked about it, either you (CrayKaese) should have bought it OR it should not have been posted on here for public sale. I'd think you would have called dibs if I made the decision to pass. It's cool though, what goes around comes around and I didn't need it anyway.....just didn't want to hack up my MINT 93 console in case someone else on here needed a nice one . Take me completely off the list as a buyer since I was passed over.

No need to get mad over things, I didn't post up the spare bracket I had due to the fact that i thought it was for denies, turns out i had already told him the console was his too. Simple mistake. No need to get pissed over it.

 

[JuStBlAzIN]

Re: cheap parts

I will take the harness.Hacked or not, $50 for a harness, will work for me.Let me know the details for payment.

Harness is gone, wasn't sold but given away as a good deed.

 

[chelo]

Re: cheap parts

send me pics of the coilover.

 

[T-Bone]

Re: cheap parts

No need to get mad over things, I didn't post up the spare bracket I had due to the fact that i thought it was for denies, turns out i had already told him the console was his too. Simple mistake. No need to get pissed over it.

Trust me, I'm not mad but I do take note of who to do business with and who to avoid :tup:. The console is water under the bridge but I called dibs for Norm on the wiring harness and you blew me/him off on that too. The proper thing to do would have been to ask if Norm was willing to pass on the harness based on the "Crispy" circumstance. Bottom line is the business principles of some (a very few at that) stink around here and I just felt in the mood to let it be known. Thanks for letting me vent!!

 

[JuStBlAzIN]

Re: cheap parts

Trust me, I'm not mad but I do take note of who to do business with and who to avoid :tup:. The console is water under the bridge but I called dibs for Norm on the wiring harness and you blew me/him off on that too. The proper thing to do would have been to ask if Norm was willing to pass on the harness based on the "Crispy" circumstance. Bottom line is the business principles of some (a very few at that) stink around here and I just felt in the mood to let it be known. Thanks for letting me vent!!

By all means if you call giving a harness away business, then go ahead. But I am by far seeing it as business. Fed-ex is 14miles away, my truck gets 12mpg @4.60 a gallon thats 9.20 in gas. Shipping alone will be around 18 bux. So you tell me how that is business. I see it as a good deed, there is no business principle there. I am loosing money on the transaction. By all means vent all you want, I would see your judgment if I had sold the harness, but i didn't receive a single cent for it. Hey if you want to avoid doing business with me, its all good. But let me remind you on the purchase of the red sy, you gave adam the money first after I had shown interest in the truck. And guess what I was S.O.L. on the truck since it was already paid for. Money talks rights? yet somehow this harness ordeal is a completely different situation. Like you said, what comes around goes around.

 

[T-Bone]

Re: cheap parts

But let me remind you on the purchase of the red sy, you gave adam the money first after I had shown interest in the truck. And guess what I was S.O.L. on the truck since it was already paid for. Money talks rights?

WOW, let's dig up a bone I never knew existed. You never called dibs on the Sy and furthermore, Adam (the orchestrator) didn't have months to wait around for other potential buyers to scrap funds together.....the deal had to go down quick and dreamers had to sit on the bench. Adam would not have undercut another serious buyer on any account!! In the end, money talks but NOT at the expense of cutting the throat of another forum member who open called dibs on an item. I called dibs for another member who I knew was good for the money....NOT myself. I wasn't gonna benefit a bit from the transaction. Matter of fact, I was gonna lose $250 on the deal cause Norm wanted to buy my Ty harness and yours was better priced so save your breath about good deeds. I have given MINT parts away on here for free but NEVER by undercutting someone else and, to boot, I have passed on items I had dibs to buy for other forum buyers in need. I just think the least you could have done was PM Norm of the situation to see if he would relinquish the sale.....trust me, he would have.

I have no doubt you are a good fellow but when I get snubbed on both items I posted about (not to mention I was the 1ST post to your ad), it gets a bit aggravating. Really, I was more shocked by Dennis's post than at your practice. Ok, I'm done ranting :tup:

 

[jpalmer]

Re: cheap parts

are the plug wires new im interested, pics possible?

oh and you meant Taylor right?

 

[MikeRenz]

Re: cheap parts

ok guys...enough with the crap banter.

T-Bone:
You never called dibs on the console. You simply asked for pictures so you could decide. Common practise around syty.net has been to call "dibs pending pictures". Just becuase you were the first to post a reply in this thread, doesn't mean you were the first to reply to it - people pm/email/im/chat all day...there are more options than just replying with a post. Personally, seeing everyone call dibs all the time is aggravating...considering 50% of them tend to back out of the sale anyway. So thats bad enough...but now we're going to start calling dibs for our friends? Why not just email your friend w/ a link to this thread so they can reply themselves. Putting up dibs for someone without even consoling that person?? c'mon now...how does that make sense, or how is that even fair. That's about the same as someone calling dibs on every single for sale item just to put a hold on it so that they can be the first to get all the good deals. I can gaurantee you that we wouldn't let that happen either.

So...we for-sale forum moderators agree that nothing wrong has been done but JustBlazin. You calling out all of syty.net for having no etiquette anymore....thats that main thing i have a problem with in this thread. Yes you conduct lots of business around here and buy/sell lots of parts...possibly one of if not the most active buyer/seller. This doesn't mean that you control the forum though.

 

[JuStBlAzIN]

Re: cheap parts

link to pictures is posted.

SORRY the wires are 8mm not 8.8mm

 

[T-Bone]

Re: cheap parts

ok guys...enough with the crap banter.

T-Bone: You calling out all of syty.net for having no etiquette anymore....thats that main thing i have a problem with in this thread. Yes you conduct lots of business around here and buy/sell lots of parts...possibly one of if not the most active buyer/seller. This doesn't mean that you control the forum though.

Umm, I never called out syty.net for having no etiquette anymore....it just seems to be popping up more frequently so let's keep apples, apples and oranges, oranges and not stretch the occasion beyond the bounds of the few involved. I have refrained from getting involved on many occasions but this particular circumstance directly involved me! I certainly realize I don't control the forum and apologize if it appeared I am trying to formulate a monopoly.

 

[MikeRenz]

Re: cheap parts

For the love of Pete, is there NO flippen etiquette around here anymore??

I read this to mean there is "no etiquette around here"..."here" being syty.net. :dunno:

All's fine, but in the end its the seller's discretion of who they want to sell their stuff to. It's not screwing someone over by not selling them something. If they take their money, or ever lead you to believe you're buying something and then renigging...then sure it's not proper etiquette. If we nitpicked every transaction on the board i'm sure there would be plenty of people that felt they weren't treated properly or given their proper 'dibs' 50% of the time.

The admins and mod's of the classifieds have agreed on the rules and haven't had to step into many transactions over the years which is great in my opinion. Carry on gents!