China freight intercooler pump install

randy merritt

Donating Member
I installed a china freight intercooler pump today:



I used the 3/4" hose fittings on the pump. Slacking, I know, but it was the easiest option. I wanted to mount the pump in the stock location, so I removed the old pump, and took my cut off wheel and made a notch in the stock mounting bracket:


After a few fittings, it went in good and does not hit anything:



 

Damian

Member
Re: China freight intercooler pump install

I have the bigger one, 300gpm and there is a huge difference. I installed mine essentially the same way. The one I have is also the newer style pump, much better than the first one I installed.
 

randy merritt

Donating Member
Re: China freight intercooler pump install

I have the bigger one, 300gpm and there is a huge difference. I installed mine essentially the same way. The one I have is also the newer style pump, much better than the first one I installed.

Pearl91, my old one never worked, so I can't comment on that. Damian, I looked at both pumps, but the 200 GPH was "Marine" rated and said it had stainless steel parts. I thought that 200 GPH should be enough, and went with the stainless one.
 

Damian

Member
Re: China freight intercooler pump install

Its still 3.3 gallons per minute, and I think stock is 2gpm?? the 300 is 5gpm, so not much of a difference but mine works pretty good even though Im gonna ditch it for an air to air soon.
 

randy merritt

Donating Member
Re: China freight intercooler pump install

Its still 3.3 gallons per minute, and I think stock is 2gpm?? the 300 is 5gpm, so not much of a difference but mine works pretty good even though Im gonna ditch it for an air to air soon.

I have ATA on my sy. Much easier.
 

Damian

Member
Re: China freight intercooler pump install

That's why I want to switch to air to air, less stuff under the hood. No fuses, water pump, coolant, wiring, hoses, and IMO it's more consistent too.
 
Top