Chip and Turbo Help

M

mrcbas

Guest
I'm basically a fuckin idiot when it comes to chips and turbos because I just bought my typhoon about three months ago. What is the best chip to get, and would I need a different turbo. The truck is stock from what I can tell. Thanks.
 

KGB Pilot125

New member
hey guys I think I can help with this one

first you need to do the basic tune up very important from what I have heard to have a good running truck to make mods too :grin:

then a scan tool or something like that. I just ordered datamaster should get it next week

then a fuel pump and an adjustable fuel pressure regulator

and now a boost gauge

and NOW you should be able to get the ultimate chip and 3 bar map sensor

and no you dont need a new turbo for this either.

Good luck,
Josh
"Not a SyTy Guru but rather a SyTy guru apprentice"
 

KGB Pilot125

New member
oh and I almost forgot your gonna need a tranny cooler too.


the above is basically gonna be my build up plus alky injection. then I will drive it till the tranny blows and have hartman rebuild it with a tranny brake. HELL YA :grin:
 

KGB Pilot125

New member
hold on guys I go this too,

a scan tool lets you interface with your trucks ECM. It shows you whats its doing like fueling and spark advance and everything that is vital to your trucks well being. cant figure out why your trucks laying over at the top of 3rd gear? well hooking up a scan tool will show you all the variables that could be contributin to it.
like O2 volts and Knock Retard. this is all very important
 
Top