Chips - Turbos & Bits

James Thomas

"NO CLASS"
Hi all. I have just purchased a 92' Ty and I am new to the Sy-Ty scene and could use a little help with three questions.

1. A friend had a Syclone a few years ago and got an A.T.R. chip # S137TX-528 REV. 1101for it. He said it was great but needed super with octane booster most all the time. A.T.R. is out of business and I can't find any info on this chip he want's to sell me. Any one able to help me out here with specs or real user experience?

2. I will be doing bolt on / non value damaging mods and would like to see about 400-450 h.p. Is this possiable with the stock exhaust manifolds or will I have to have custom headers made? A.T.R. made these but is gone now and I am not finding any other sources if the stock exhaust won't handle 400-450.

3. There are a lot of different turbo setups out there right now and being a supercharger guy (roots type) till now, I am kind of handicapped about turbo specific info. and was wondering if someone can give actual experience based knowledge on let's say several of the turbos listed below:

"We have a very unique very powerful turbocharger that has a fresh professional rebuild and warranty. This turbo is an upgrade unit for the GMC and Chevy Cyclone and Typhoon turbocharged vehicles. It has a new 8 cm turbine housing, a TDO6 turbine wheel, a fresh rebuilt center section with a HI-FI 60-1 Garrett TO4 Turbonetics compressor side. The compressor wheel was purchased new for this turbo as well. This turbo has a T3 style turbine inlet flange and is very suitable for many applications where 500 horsepower is desired"
Note: This company says this is a direct bolt on with no mods required, works with the factory boost control, makes an efficent 20-22 lbs. boost and turbo lag is only 200 R.P.M. greater than stock. A 2800 stall and it would not even be noticed - End quote.

"This a true bolt on full Garrett turbocharger specifically designed for the Sy/Ty, this is not a hybrid. Why spend the money on a ported and clipped 20g (44 lbs/min)? When you can bolt on a Full Garrett T3 / T4 turbo to your Syclone/Typhoon truck. Run a full Garrett turbo on your GMC without changing your manifold and downpipe. This Garrett T04B V-Trim (48 lbs/min) turbocharger will bolt on to your stock manifold and downpipe without any additional modifications. This turbocharger is designed to operate most efficiently at 300-450 horsepower at the wheels (proper engine modifications required). Oil feed and drain modifications required. Also included is our monster 38mm internal wastegate and custom actuator." End quote.

Thanks in advance for helping a "Newbie"
James Thomas
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Chips - Turbos & Bits

search my friend, lots of good info on this site.

1. as far a chips go, go with a custome made chip from phil long or michael hood
2. syty can go into the 10s with stock exhaust manifolds so 400hp is ok
3. depends on what setup you want, mainly your looking for the exhaust side of the turbo to bolt on to the flange of the stock exhaust manifold, after that possibilities are endless......
 

James Thomas

"NO CLASS"
Re: Chips - Turbos & Bits

Thanks QuickStorm. I did a search on the A.T.R. and cam up with all most nothing.
How do I contact Mr. Long and Mr. Hood? As far as the turbo set up goes, I am new to turbos?
Supercharger man for about 20 years. I do have an excelent knowledge of boost and the required support for boost but my turbo knowledge is just starting. Will a factory / lightly moded stock unit and e.c.m. make 400 - 450 h.p.? Do I really need to go with a replacement hi end turbo and major aftermarket controls? Can I do reasonable mods with the factory set up and make 400+?

Thanks!
James
 

garcia92ty

New member
Re: Chips - Turbos & Bits

i bought a ty 2 yrs ago, not much into the whole engine thing more into the minitruckin thing. anyway 2 yrs ago i saw my ty on a car lot and jumped on it right away, being into trucks i couldnt pass it up( i have 7) . an old man but the ty brand new off the lot, he was 70, i came across his grandson today. i couldnt talk for long but he brought up something that puzzled me. he said that his grandfather had turned the turbo down. remember im not an engine guy. is this possible? and if so how do u turn it back up? im not a moron jus need some guidance. also what other bolt ons will improve the performance of ty? i always thought it SHOULD be faster than it is. i customize cars on the side and it so hard to not do anything to the ty but i want to keep the value of it up. any help will be useful. please email to lilblacktruck@hotmail.com. thank you
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Chips - Turbos & Bits

garcia92ty said:
i bought a ty 2 yrs ago, not much into the whole engine thing more into the minitruckin thing. anyway 2 yrs ago i saw my ty on a car lot and jumped on it right away, being into trucks i couldnt pass it up( i have 7) . an old man but the ty brand new off the lot, he was 70, i came across his grandson today. i couldnt talk for long but he brought up something that puzzled me. he said that his grandfather had turned the turbo down. remember im not an engine guy. is this possible? and if so how do u turn it back up? im not a moron jus need some guidance. also what other bolt ons will improve the performance of ty? i always thought it SHOULD be faster than it is. i customize cars on the side and it so hard to not do anything to the ty but i want to keep the value of it up. any help will be useful. please email to lilblacktruck@hotmail.com. thank you

maybe he has a manual boost controller or adjusted the wastegate so it wont hold more than base boost.
 

93ty475

Donating Member
Re: Chips - Turbos & Bits

garcia92ty said:
i came across his grandson today. i couldnt talk for long but he brought up something that puzzled me. he said that his grandfather had turned the turbo down.


haha...maybe the grandson got a hold of it and cranked up the boost...then the grandfather turned it back down?? :dunno:
 
Top