Code 32

B

BobbyFresh

New member
Please help
Istarted getting a code 32 Egr problem it usully happens at light throttle
however the truck seems to boost more and run much better before the code is cleared . If i drive whith a tech 1 connected you sometimes see no ex gas resirculation . can you blank the egr without geting a code ?
 
InvisiBill

InvisiBill

Active member
The EGR test works by turning on the EGR when it normally wouldn't be, and watching for the fueling to change in response to the change in intake stuff. To pass the test and not throw the code, the EGR actually has to be working and do it's job. Either get a chip with the EGR code disabled, reinstall the EGR, or ignore the light. It usually goes away on its own after driving a bit, and only affects performance when the CEL is actually on.

If you do go with a non-EGR chip, your best bet is either the Ultimate or a custom chip. "Custom" can be as simple as having a local chipper change the EGR stuff on your stock chip. Most of the "enhanced" SyTy chips are crap. Some are flat out dangerous for your engine.
 
You must log in or register to reply here.
Top