Code 59 Idle AFR

4C FED

Absolutum Dominium
I'm curious what AFR you guys are using to obtain a good idle.

On the Sy running FAST I had to set it @ ~13.0-13.5 to obtain a nice smooth closed loop idle. Anything leaner than that made it idle like poo.
 

12secondSY

Syty Killer :(
Re: Code 59 Idle AFR

Mine likes it about the same, leaner likes to try to die when the volvo fan kicks on, but thats probably due to a weak charging system.
 

UR50SLO

V6+2=LSXCamaro
Re: Code 59 Idle AFR

That Idle and cruse part is touchy.... It uses almost the same Cells or blocks to idle as it is when cruzing....
Have to do a happy medium.

Heather's idles at about 13.6 hot (open loop) all in open loop right now.

I had been running 95oct. pump gas I'm sure it's got 15% Ethanol so I run about a point higher AFR

at WOT to make up for the loss of BTU. Now that the station is switching hands I think we'll be back

to 93oct that's all gas... I'll set WOT for gas at 11.5-11.7 With 95/Ethanol it's 10.8's

11's at idle whew... Lol...

Part throttle I like to see 13's and cruse anywhere from 14.7-15.5 Once again thats tough when \

some of the idle cells are shaired with the cruze cells.

~Scott
 

skwayb

NWSTP
Re: Code 59 Idle AFR

If F29x isn't working well for you in both idle and cruise, you can turn F29c back on and then tune that table for idle. You should make a post about it at www.code59.org so we can work on issues if you run into one.
 

2kwik4u

Resident slow guy
Re: Code 59 Idle AFR

skwayb said:
If F29x isn't working well for you in both idle and cruise, you can turn F29c back on and then tune that table for idle. You should make a post about it at www.code59.org so we can work on issues if you run into one.

Paul hit the nail on the head once again. F29C is the answer to getting the leaner cruise, and slightly richer idle.

I've run into an instance where part throttle around town driving, and part throttle highway cruise are using some of the same cells......I ended that one in a compromise as well, however I think it was the build (big heads and cam).
 

SBNova

New member
Re: Code 59 Idle AFR

Here is a copy of mine. I run a MUCH leaner AFR than you guys do. My combo is all stock except for some cheezy 3" cat back that the previous owner installed. I even have a stock airbox and filter. I think my idle is smotther now than when it was running the stock $58 code. 31kpa is idle in park, 41kpa is in gear, and 51kpa is in gear with the AC on.
00 12 22 31 41 51 61
1600 14.70 16.00 16.00 15.80 15.80 16.20 16.00
1200 14.70 14.70 14.90 15.10 15.20 15.30 15.20
800 14.70 14.70 14.80 14.80 14.60 14.50 14.60
400 14.70 14.70 14.70 14.70 14.70 14.70 14.70


I am also running the following timing;
37 53 67 83
1200 16.88 20.04 20.04 14.77
800 14.06 16.17 15.47 11.95
400 17.93 17.93 16.88 13.01

But my spark advance vs manifold temp vs boost table changes the base somewhat-

00
100 -1.76
80 -1.76
49 0.70
24 2.11
00 -1.76

The rest of that table is nearly stock except for some extra timing pulled over 125kpa as a safety net.
 
Top