Sean Donn
New member
I began code59 tuning for the first time today and saved a log to see if I can get some help from you guys. Uunfortunately I do not know a good way to share the xdl file. I am running wyosyclone's 40lb bin, code59_3bar_1.6_v18.xdf, and a160.adx. I am unsure if my method is right, but I used a delco chip that I had piggybacked on the ecu and rewrote it with wyo's starter bin file. I then drove around for a couple minutes and collected the data linked below.
update: after changing to a different .adx file, I logged a new file that is much better than the one linked below. I then encountered the white smoke issue discussed in my following posts. any input on what it could be from would be greatly appreciated
update: after changing to a different .adx file, I logged a new file that is much better than the one linked below. I then encountered the white smoke issue discussed in my following posts. any input on what it could be from would be greatly appreciated
Last edited: