Code59. Who's using it and...

nello

Active member
what is your opinion so far? I haven't heard much from these peeps lately. I'd thought more guys on hear would be tuning, or is it really just set and forget? I'm leaning towards code59and would appreciate hearing from the vets, noobs, PROS :tup: and ones about to s**t or get of the pot. Which did you do and why? :alien:
 

TYTILIDIE

METH HEAD
Re: Code59. Who's using it and...

I run 59. I think it is the best way to go. For one, you develop a deep sense of how tings really work, which is worth its weight in gold when it comes down to performance. It is cheap to do, not incredibly easy for all. Took me a few months to really understand what I was trying to do. But once you get the hang of it you feel like there is no stopping you. When you do any bigger mods that would require chipping, you can just do it yourself. Its a why not IMO.
 

JSM

Active member
Re: Code59. Who's using it and...

If you mod your truck you will need to tune it also. I don't care if you buy BigStuff3, FAST, or the stock ECM it will require tuning. Learn 1 system the others become fairly easy also and all are similar.

code59 just makes tuning a stock truck easier, as well as fixes some internal program issues the stock code had.
 

ppress79

Member
Re: Code59. Who's using it and...

I debated this for almost 2 months before I made the plunge and ran $59. The tables and graphs were intimidating until I saw them in action in real time. My system installed and worked the first time(took a little work to get Vista to work programming the Inovative WB) and I have never regretted it. Just have a base bin to fall back on and an experiment bin to play with new ideas. :tup:
 

WyoSyclone

Active member
Re: Code59. Who's using it and...

It's the most fun, and the best 'mod' I ever did on my Sy. I'm not doing anything with it right now (except studying) 'cuz the Sy is locked inside for the winter.
A lot of the blowup problems you see on this forum are because guys make either one, or a bunch of, mods. They buy a chip expecting it to run great, which you might do with a naturally aspirated engine. What I've found with these engines is that any LITTLE change can affect them enough to cause engine damage if one keeps his/her foot in it, without it being tuned correctly - this includes something as small as a change in brands of gas, or a change in plugs.
If you're not datalogging these motors, your experience with them being reliable will be short - if you're making mods. If you're not making mods and have a good running truck, then all is cool, with proper maintenance.
Code59 lets you make a change, datalog it, play with the variables, and monitor the effect, good or bad, of your changes.
I think it's the ONLY way to go for someone who is serious about keeping their SyTy, interested in making mods, and not using a standalone system (FAST, etc.).
 

nello

Active member
Re: Code59. Who's using it and...

Is it necessary to connect the wideband o2 Sensor to the F14 (WBlin+) and B9(WBlin-) pins on the 749 before code 59 will work properly?
 

JSM

Active member
Re: Code59. Who's using it and...

Code59 will run just fine without that info, tuning it to work with your truck will be difficult, autotune also will not work until the WB data is in the data stream.

Chances are you will need to adjust the chip and without WB data being input it is very difficult for a newbie to know what to do.
 
Top