Cold/Hot fueling difference

Aeroking

e.i.
I have a situation that bugs me. With my FAST on a cold start my truck runs a little richer than it should be (13.5afr at idle warm). It stays that way after the engine is warmed up. Until I restart the truck, then everything goes back to normal (14.4 afr at idle).

But if you drive continuous after a cold warmup it runs rich. That's after all the warmup enrichment and afterstart fueling has timed out. So there's nothing in the tune thats richening it up.

Any ideas? Nothing broken, its just a nuisance.
 

autoaddictions

Active member
Re: Cold/Hot fueling difference

I'm not a fast user but in BS3 you have warm up enrichment based on coolant temp. Once temp is scaled up fuel is scaled back. Something has to be telling your enrichment to stay on after coolant temp is reached. Check your coolant enrichment table. Can't you see after the temp is at operating range if your adding fuel to the base map. Big stuff has a O2 correction
That you can log or display I can see if it's adding or subtracting fuel in real time.
 

Aeroking

e.i.
Re: Cold/Hot fueling difference

All my enrichments (coolant temp, air temp, warmup, afterstart) time out, by it still runs a little rich. But as soon as your restart the truck everything works perfect. Closed loop doesnt bring O2 correction in until 1500rpm, plus I log the correction.

I run 2 widebands. I wondered if maybe the widebands were clean on coldstartup, and they get contaminated after running. But both widebands match, so that can't be it.
 
Last edited:

RealFastV6

@jb_and_his_coffee
See if your map sensor is reading identically at both the warmed up idle and the restart idle.


Sent from my iPhone using Tapatalk
 
Top