Combo help(cam/heads)

cloneman315

Active member
Re: Combo help(cam/heads)

alky is for drinking,im just saying if u want to do all u can to make your enigne live it is worhth it,just ask some of the top guys about a stock syt oil system on a built motor they will tell u the same
 

#2875

built, not bought
Re: Combo help(cam/heads)

cloneman315 said:
it would be more than 100 im sure all the lines are stainless braided plus hi9s labor etc,there is a big restriction at the stock oil filter housing on the fender and the lines.

well i disagree. maybe if you road race under 500 hp but i am not going to waste my money on this product however i respect your feelings and i'll just leave it at that.

now onto the cost thing. labor is a non issue because of the definition of do-it-yourself plus i ported my adapter in about 15 min. ok the lines and fittings are expensive but you could use rubber hose and brass fittings and get the exact same performance right?

here is a link to a oil cooler (exact same part number) that sold for under $50.

http://cgi.ebay.com/ebaymotors/setr...mdZViewItemQQcategoryZ107067QQitemZ4616261688

now just buy a $400 oil filter and you are golden. i sell them if you are interested all the top guys are using them.
 

#2875

built, not bought
Re: Combo help(cam/heads)

qbnkiller said:
Actually, that's a good alky kit OR a good tune and a tune-up!

sorry. i am good friends with the local speed shop guy i forgot how much you guys pay.
 

#2875

built, not bought
Re: Combo help(cam/heads)

cloneman315 said:
alky is for drinking,im just saying if u want to do all u can to make your enigne live it is worhth it,just ask some of the top guys about a stock syt oil system on a built motor they will tell u the same

so you have these oil mods and you don't use enough boost to justify alky? kind of seems like overkill like dry sumping a stock motor.
 

cloneman315

Active member
Re: Combo help(cam/heads)

have u priced an fittings this size latley some are 30 dollars a piece,and have u ever made stainless steel bradieds lines ?they are a bitch and i dont know if u seen my engine pics in the pic gallerey but it is almost as clean as u can get and i kinda wanted the stainless look it is more durable than rubber,and there is no reason for alky on my tune my build is the same as phills and he went what 10.20s hmmm,if u have a good tune and the right parts u dont need alky,he will and so will eric at turbo time tell u the stock oil system set up sux period.But honestly u have to do what u want i have none of the problems that most people have with these trucks and doing things the right way not the cheap way might be the reason.Yeah that oil cooler is used with broken tabs and probably off a blown motor.and i woulndt use plain rubber house on 80 to 100 psi oil system just my choice And no i dont need alky nor will i ever run it.and im going to run 26 psi and im sure i will have no problems.
 
Last edited:

qbnkiller

Conflaguration Specialist
Re: Combo help(cam/heads)

cloneman315 said:
have u priced an fittings this size latley some are 30 dollars a piece,and have u ever made stainless steel bradieds lines ?they are a bitch and i dont know if u seen my engine pics in the pic gallerey but it is almost as clean as u can get and i kinda wanted the stainless look it is more durable than rubber,and there is no reason for alky on my tune my build is the same as phills and he went what 10.20s hmmm,if u have a good tune and the right parts u dont need alky,he will and so will eric at turbo time tell u the stock oil system set up sux period.But honestly u have to do what u want i have none of the problems that most people have with these trucks and doing things the right way not the cheap way might be the reason.Yeah that oil cooler is used with broken tabs and probably off a blown motor.and i woulndt use plain rubber house on 80 to 100 psi oil system just my choice And no i dont need alky nor will i ever run it.and im going to run 26 psi and im sure i will have no problems.

You are right...the price of SS braided lines and fittings is not cheap. I also agree that a good tune and sensible build plan goes a long way. I see that you will not be using alky, and that's fine. I believe (my opinion) you will probably have to compensate somehow, either cooling the intake charge with nitrous like Phil, pulling out more timing to up the boost, or be running race fuel a bunch. As I stated earlier, there is more than one way to reach your goals. I, personally, do not see the need for this (larger oil lines) upgrade. Yes we are working the engine hard for 10-15 seconds at a time, but unless you are autocrossing your truck, where you maintain a load for a bit of time, the oil temperatures should stay in check (rise while directly under full throttle, but start to cool off when you lift at the end of the track). By paying a little more attention to your truck at the track and not shutting it off right after you get to the pits, you can get the oil temps down quite a bit with it just sitting there idling. Again, this is my opinion. Some will think I am wrong. That's fine. It's your truck. I would put that money elsewhere.
 

cloneman315

Active member
Re: Combo help(cam/heads)

that is also one thing do my truck always has race fuel in it,it is a little more money but worth it,but i also dont daily drive mine.As far as the oil sysytem im just going by the oil failure i had and other have had,and also i know if u ask erics engine guy they believe the same thing and my builder also said the same,when you are running sutch high pressure 80 plus psi u need that extra flow.Maybe u do Maybe u dont
 

#2875

built, not bought
Re: Combo help(cam/heads)

cloneman315 said:
As far as the oil sysytem im just going by the oil failure i had and other have had,

WELL why didn't you say so earlier????? it's still a lot of money but if you roached two motors and you are certain they were starving for oil then i completely understand

cloneman315 said:
and also i know if u ask erics engine guy they believe the same thing and my builder also said the same,when you are running sutch high pressure 80 plus psi u need that extra flow.Maybe u do Maybe u dont

well i don't know eric or his engine guy and i am my own builder but howard and billy bob's sister's tranny oil changer says you don't need a cooler at all unless you are autocrossing.

it's just a lot of loot for a maybe you do maybe you don't need it mod.
 

E-Rue

New member
Re: Combo help(cam/heads)

sounds like a bunch of misinformation going on in here...... im glad you guys know it all, that way i wont have to waste my time explaining to you how things work and why they are needed. #2875 you can come on here and talk about things you dont and cant possibly understand all you want to, but this kinda BS, and general misinformation/bashing is exactly why the people in "the know" dont feel like coming here and explaining .......you think its fun answering the phone and explaining to 5 different people why, what your spouting off as fact on syty.net, is really just BS with nothing whatsoever to back it up? dealing with customers is hard...... they dont always understand, and it takes a lot of my time on a daily basis to try to explain why we do things a little different than the rest. luckily for me i wont have to explain anything to you, or worrie about you ever running one of our race motors with a high volume oil system and blocked off bypass. because you "know" thats not needed, and can get by with stock oiling and no oil cooler at all. for the rest of you out there reading this...... just ignore most of the comments in this thread, as they are really taken out of context of the intended use of this product. no you dont need a high volume oil system for a stock truck. yes you do need one for a track car thats gonna get hammered on over and over and over again. yes you do need upgraded oil lines, filter housing and oil cooler, if your running our motor with the modified oil system. if your running someone elses motor..... feel free to run whatever you want to.

e
 

E-Rue

New member
Re: Combo help(cam/heads)

as far as the original post goes (before it got way off topic), id go with a 415cam, 1.6 rockers, vortec heads, 65lb chip, 61mm turbo, and 2500 stall.

e
 

12secondSY

Syty Killer :(
Re: Combo help(cam/heads)

E-RUE said:
as far as the original post goes (before it got way off topic), id go with a 415cam, 1.6 rockers, vortec heads, 65lb chip, 61mm turbo, and 2500 stall.

e
Thanks, I quit posting in this thread cuz it was getting nowhere.
 

12secondSY

Syty Killer :(
Re: Combo help(cam/heads)

cloneman315 said:
i was just trying to help also ,hey what do i know
I appreciate the help, and didnt mind the debate on the oil system, it just got out of hand so I stayed out of it. I did see it on your truck though and it looks a lot better than the stock system. Its something I will consider when everything else is taken care of and I know my engine is where I want it to be(and tranny). It shouldnt be a necessity on mine, more for added safety and looks.

I think I am going to do the 415 cam and save more for the vortecs instead of going cheap and doing L35's. I would hate to do heads again in a year. As far as stall and turbo, I'll do a stall when I have to rebuild the tranny here very soon(shortly after engine goes back in I think). For now Im gonna run 50lb injectors and chip with the bigger stock turbo and upgrade that later to something bigger. Otherwise I wont feel like the truck is ever gonna be done and that makes it really hard to spend money on it.
 

qbnkiller

Conflaguration Specialist
Re: Combo help(cam/heads)

if you havent decided on a turbo, should cehck out the one JS is selling...the KB might be a giid fit for you right now.
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Combo help(cam/heads)

like i said before, i'm following cloneman and turbo6's build

415, vortecs, rpm headers, 75#, 75#chip, 67mmBB, a2a, 2800

i can't wait till its finished, then i will be getting a waller rebuilt 700r4
 

SeattleSy#1255

Category 5 Conservative
Re: Combo help(cam/heads)

QUICK STORM said:
like i said before, i'm following cloneman and turbo6's build

415, vortecs, rpm headers, 75#, 75#chip, 67mmBB, a2a, 2800

i can't wait till its finished, then i will be getting a waller rebuilt 700r4

Nothing wrong with going with a proven combo! :tup:
 

cloneman315

Active member
Re: Combo help(cam/heads)

all i know is my truck runs and drives around better than a stocker ,anyone want to drive it
 
Top