Compression Question

sy2873

New member
If anyone has had a recent compression check on a healthy motor, what were the results? I am in the process of trying to sell my Sy that the previous owner dumped around 9k in heads, rods, pistons, the Kenne Bell chip, etc. The truck itself runs amazing and I have not had any difficulties with any aspect of the truck. But, one guy is interested who lives a few hundred miles away and wanted me to compression check the motor before coming out (it makes sense to me). My readings taken this afternoon were 120, 118, 117, 119, 120 and 120. The mechanic informed me that turbo motors should be in close range of one another and not over 120. Meanwhile the potential buyer thinks the reading should be 145 to 160. Did the mechanics not do the compression correctly? Any feedback would be greatly appreciated. Oh yeah, in my biased opinion, I have ridden in many local sy's and ty's and this truck runs as good or better than them. Thanks ahead of time.
 

Falco

Donating Member
My freshly built engine gives 150psi in all six cylinders. My old stock engine also was around 150psi in four cylinders and around 130psi in other two. I run great like this till a point... :-?

HTH,
 
Top