Computer questions

91s104wd

New member
I realize you SyTy guys are probably sick of hearing the copycats ask these stupid questions, but I was wondering your ideas on computer/chips to transfer a standard S-dime to a turbo motor. It is currently a 4.3 TBI, but I am going to order the McCoy turbo motor. So what do I need to make this work, if you guys don't mind??
 

leroy

Donating Member
ECM, memcal, wiring harness, upper and lower intake, intercooler, turbo, exhaust manifolds, crossover pipe, downpipe, all sensors, injectors, fuel rail, etc.

If you want awd, include transmission, transfer case, front driveshaft, front diff.

Buy all that stuff and we will help you from there. :D

Jim
 

91s104wd

New member
OK, well I will have everything but what kind of ECM? what is a memcal? Are the wiring harnesses different from the 4.3 TBI to a turbo charged 4.3? So I am now wondering where i can get all the eltronics for the new motor. While I am on the subject of copying, is the McCoy motors any good http://www.tobefast.com/sytyengines.htm ? Well any help would be great.
 

Ian Turgeon

Cascading Inspiration
McCoy has proven to go fast, and build strong parts. There have been a few cloudy issues with them Im sure you'll hear about or find (search for mccoy on this site)

the harnes is different, you may just want to go to a F.A.S.T. system since your starting from nothing. The ecm (memcal is the chip essenctially) can be had from several different applications. check out http://www.tragacs.com/man.html for some of the ecm stuff
 

91s104wd

New member
alright I have figured out what kind of ecm I need, but is there any ideas on where i can possibly pick up a new one. (yeah right)
 

Tooky

Serious about performance
You can easily get the ECM For $50 used. They used in a multitude of vehicles like certain Quad4s, Skyhawks, Turbo Sunbirds, etc. LMK if you need more info.
 

BillC

New member
As usually gets pointed out, but hasn't been this time, it is probably easier and cheaper in the long run to just sell your truck and buy a real Syclone or Typhoon. There is a lot of work involved with doing the conversion correctly.
 

91s104wd

New member
BillC said:
As usually gets pointed out, but hasn't been this time, it is probably easier and cheaper in the long run to just sell your truck and buy a real Syclone or Typhoon. There is a lot of work involved with doing the conversion correctly.

I realize this when I started this whole project. But what I am going for hear is to turn a regular S into a screaming machine. So whne I go to race against some of the ricers that think they are hot shit. I will then get to see there faces when I kick their ricen a$$. But if I role up in a Syclone then they will suspect something. Plus I already have the base setup. I have the four wheel drive, the tranny work is already done, and it is lowered as low as I can get, and the front fender wells modified to hold a wider tire. Now I am basically down to switching the motor, ecm, and the 3bar chip, oh and headers. One more question that I just thought of, well two. Is the radiator the same? And where is the intercooler mounted on the syclone? Thanks again for all your help with the copycat job here.
 
Top