Connecting rods? Crankshaft?

Synister

New member
Are the SYTY connecting rods different than the non SYTY engine rods? What kind of power levels do you guys think the stock connecting rods will handle?

Also I know that I have the Romulous engine with the crank that has the hole in the first journal so I believe it to be the light duty crank. Is there any added strength by going with the "heavy duty" crank? Also will I have to have the entire reciprocating assembly rebalanced (flexplate, balancer, rods, Probe pistons, crankshaft)?
 

Synister

New member
Re: Connecting rods? Crankshaft?

Wrong, wrong, wrong,

Go read the article in the vault again. Never does is say "duty" after the words heavy or light. These references are to balance strategy. Not to strength. There are two different piston weights. These must be used with the correct crankshaft balance. These are referred to as "heavy" and "light".

I see! Thank you for the eye opener on the crankshafts. I was reading the stuff by Doug Anderson last night and though they had listed "duty" I will go back and read the sticky.
 

Synister

New member
Re: Connecting rods? Crankshaft?

Well it looks like I will have to re balance my assembly regardless because I doubt my pistons are OE weight.

Any ideas on stock connecting rod strength?
 

jpalmer

New member
Re: Connecting rods? Crankshaft?

There are many threads on this. do a search and you will see. But to sum it up for you, its not power that usually kills them, its detonation. 400 hp and 500# torque is around max, but thats debatable. However, a little knock will blow a built bottom end out. The first question is, what is your end goal? 10's or 12.xx? Or just reliable.
 

jwaller

Evil Genius/SyTy Guru
Re: Connecting rods? Crankshaft?

stock rods came in the TBI 160hp motors. they are not strong enough for stock syty hp levels. if you rebuild a syty motor and reuse them you are wasting time and money. buy something better.
 

syclone rider

New member
Re: Connecting rods? Crankshaft?

What i think is even more stupid is a set of 8 eagle rods for a 350 5.7 same length for around $350 but a set of 6 same lenght just different journal size the cheapest i found was $415. 8 or 6 hummmm lets do the math and it pretty much = Doesnt make any damn sense!
 

BMFB

Not to scale
Re: Connecting rods? Crankshaft?

what doesn't make sense, the journal size is different on an even fire crank, they're 15 thousands bigger. i dont know alot about it, but 15 thousands gap is a big gap in an engine, and i dont think you could make it work...if you can find out let me know, im rebuilding an engine right now wishing i had the money for some rods, but i only have a few hundred extra bucks...
 

ghettosled

SYTY SUPERSTORE
Re: Connecting rods? Crankshaft?

what doesn't make sense, the journal size is different on an even fire crank, they're 15 thousands bigger. i dont know alot about it, but 15 thousands gap is a big gap in an engine, and i dont think you could make it work...if you can find out let me know, im rebuilding an engine right now wishing i had the money for some rods, but i only have a few hundred extra bucks...

actually its 150 thousands.. 2.100 vs 2.250

And the pricing makes sense when you consider the v6 market.. They probably sell 1 set of v6 rods for every 100+ v8 rods.
 

syclone rider

New member
Re: Connecting rods? Crankshaft?

actually its 150 thousands.. 2.100 vs 2.250

And the pricing makes sense when you consider the v6 market.. They probably sell 1 set of v6 rods for every 100+ v8 rods.

Yeah man i realize that i was more less just talking shat.
 
Top