Converter Lockup ?

Am I correct in assuming that the TC is locked up at WOT in 3rd gear by the chip (ECM). I mean is it programmed to do this? The reason I ask is that mine does not seem to be locking at WOT like it used to. It definitely locks up correctly at low, cruise speeds. I tried grounding it with the ALDL trick and there was no difference (at WOT, that is).
Thanks for any input.
Mike
 

jwaller

Evil Genius/SyTy Guru
converter lockup is based on MPH and MPH vs TPS ONLY. so it could lockup in 2,3,4 just depends on your MPH
 
jwaller,
So at what mph does the TC lockup in 3rd gear at WOT?

<font size=-1>[ This Message was edited by: Mike from Jersey on 2002-01-30 17:56 ]</font>
 

jwaller

Evil Genius/SyTy Guru
its hard to tell when the converter actually locks when your hard into it..usually you need to have DM or something running so it can tell you.....at lower power leves its easy to tell when it locks but if becomes difficult when you at WOT....the 9/11 makes it somewhat easier..usually you will drop ~200-300 rpm when it locks...from looking at things it looks like around 70mph is when it locks...@WOT

_________________
TE-60, ATR headers, Vortecs, TCS converter, 50# chip, NOS Profogger, Built by J&G Racing

<font size=-1>[ This Message was edited by: jwaller on 2002-01-31 12:45 ]</font>
 
I have a friend coming over with Data M this Saturday. Denny, you say the DM tells you whether or not if it's locked, does this mean that the TC is actually locked or does it just confirm that the ECM is sending the signal to lockup? Anybody?? It seems as if my truck has lost that top end charge that you get when the TC locks in 3rd, and the lower mph at the track kinda' confirms it. Just trying to see what's going on before jumping to conclusions and swapping out the TC.
Thanks,
Mike

<font size=-1>[ This Message was edited by: Mike from Jersey on 2002-01-31 13:51 ]</font>
 

denny

Active member
I its reading off the ecm so I guess it's showing the ecm sending signal to lock up the tc. I can't really tell if the tc is acutally locking up (too fast and plenty of bumpy road in ny).

Denny
 
I don't think the Ultimate locks the converter. I know for sure the DIG chip I had did right after the 2-3 shift around 69mph. The one run I've made with the Ultimate didn't lock the T/C.
 

jwaller

Evil Genius/SyTy Guru
yes the ultimate locks the converter.....the road speed is just raised for the 9/11....and DM is only going to show you the ECM command for lockup...,you will have to watch the RPMS to verify that its actually happening
 

smeagol

Active member
Ultimate locks it up.

If you have Datamaster you have to watch for the flag to see if TC locks up, BUT just watch RPM vs MPH, and you'll see a dip :wink:

Easy way to check shift points and whatnot.
 

Tooky

Serious about performance
On 2002-01-31 20:31, jwaller wrote:
we already said....70 MPH at WOT....and at light throttle 45 MPH
I have the stock chip and that's exactly where mine does it, +/- 3 MPH
 

Mephisto

These trucks are cursed
after reading this, it makes me wonder if i have a TC problem... my trucks rpms are all over the place in 3rd, on both the ultimate and stock set up, is it possible the TC is locking and unlocking, causing the rpms to rise and fall? also where on datamaster does it say the TC is locked?
 

Tooky

Serious about performance
Double click on one of the yellow rectangles on the upper right of DataMaster, like one of the stupid ones you don't understand (there are a ton I don't understand that seem to be totally useless like "DRP Dropped" or whatever.. Anyways when you double click on it, select "TCC Lock" and BAM you got yourself a bona fide torque converter clutch lockup indicator.

Someone else suggested something a while ago that came to mind for you, Neal. You could try unplugging the TCC connector on your transmission and take a drive and see if that fixes your problem because it will prevent the TCC from locking up. Sheesh I wish I could remember more of the details on it. I don't want to give you bogus directions on unplugging the wrong thing..
 

Tooky

Serious about performance
Actually are you sure your ignition isn't breaking up at that point? Plug gap too wide, old plugs, bad/weak plug wires, non-ACDelco coil? Some possibilities..
 
Top