Crank -- what to do

FLSY2730 said:
If turbo tony went 10.70 with stock exhaust manifolds you would think he would benefit from having a good set of headers , like yours if they work out.
The stock exhaust manifolds suck. Big time. Someone reliable (I think BG) has quoted a .5 sec improvement in 1/4 mile times in a truck with bolt ons with the addition of the ATR headers. I think the PEP design would give that much improvement again over the ATR in a moderately modified truck. The fact that people go fast with the stock restrictive breathing is a tribute to forced induction. Relieving the restriction will add power if done correctly to maintain velocity in the critical areas.

FLSY2730 said:
Cool, sounds good. How much weight are you talking about saving, i got my sy down to 3100 without me in it.
Probably took off at least 200 lbs with the suspension and radiator support. Moved the battery to the bed for better front/rear weight distribution (and more room underhood). Put back some weight though with upgraded components here and there. I will difinitely get a weight when she's done.
 

FLSY2730

New member
Is this rad. support peice available, how much is it and how much difference. Does dennis custom make these , i would like to get one if i keep my truck.
 
FLSY2730 said:
Is this rad. support peice available, how much is it and how much difference. Does dennis custom make these , i would like to get one if i keep my truck.
Oh, *everything* is available at PEP.

Weight loss is about 25 lbs right off the nose of the truck. Construction is of aluminum square tubing. Very strong - much stronger than it sounds once welded and installed. It's "skeletonized" so there is plenty of room to custom mount radiators, IC's, coolers, condensers, and whatnot and still leave room for greatly increased airflow into the engine compartement. The main reason mine was done was to allow for a much more efficient air intake. Mine retains the stock prop rod and a reworked hood latch. Also re-uses the stock headlight buckets with mounting and aiming mechanisms. Once it's back from the powdercoater it should be invisible with the hood down.

Don't have a price offhand but I could ask. Or call PEP 813-620-4293.
 
Top